2 Copyright (C) 2001-2011 Paul Davis
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #include "gtk2ardour-config.h"
24 #include <gtkmm/liststore.h>
25 #include <gtkmm/stock.h>
26 #include <gtkmm/scale.h>
27 #include <gtkmm2ext/utils.h>
28 #include <gtkmm2ext/slider_controller.h>
29 #include <gtkmm2ext/gtk_ui.h>
34 #include "midi++/manager.h"
36 #include "ardour/audioengine.h"
37 #include "ardour/dB.h"
38 #include "ardour/rc_configuration.h"
39 #include "ardour/control_protocol_manager.h"
40 #include "control_protocol/control_protocol.h"
42 #include "ardour_window.h"
43 #include "ardour_dialog.h"
44 #include "gui_thread.h"
45 #include "midi_tracer.h"
46 #include "rc_option_editor.h"
48 #include "midi_port_dialog.h"
55 using namespace Gtkmm2ext;
57 using namespace ARDOUR;
59 class ClickOptions : public OptionEditorBox
62 ClickOptions (RCConfiguration* c, Gtk::Window* p)
66 Table* t = manage (new Table (2, 3));
69 Label* l = manage (left_aligned_label (_("Click audio file:")));
70 t->attach (*l, 0, 1, 0, 1, FILL);
71 t->attach (_click_path_entry, 1, 2, 0, 1, FILL);
72 Button* b = manage (new Button (_("Browse...")));
73 b->signal_clicked().connect (sigc::mem_fun (*this, &ClickOptions::click_browse_clicked));
74 t->attach (*b, 2, 3, 0, 1, FILL);
76 l = manage (left_aligned_label (_("Click emphasis audio file:")));
77 t->attach (*l, 0, 1, 1, 2, FILL);
78 t->attach (_click_emphasis_path_entry, 1, 2, 1, 2, FILL);
79 b = manage (new Button (_("Browse...")));
80 b->signal_clicked().connect (sigc::mem_fun (*this, &ClickOptions::click_emphasis_browse_clicked));
81 t->attach (*b, 2, 3, 1, 2, FILL);
83 _box->pack_start (*t, false, false);
85 _click_path_entry.signal_activate().connect (sigc::mem_fun (*this, &ClickOptions::click_changed));
86 _click_emphasis_path_entry.signal_activate().connect (sigc::mem_fun (*this, &ClickOptions::click_emphasis_changed));
89 void parameter_changed (string const & p)
91 if (p == "click-sound") {
92 _click_path_entry.set_text (_rc_config->get_click_sound());
93 } else if (p == "click-emphasis-sound") {
94 _click_emphasis_path_entry.set_text (_rc_config->get_click_emphasis_sound());
98 void set_state_from_config ()
100 parameter_changed ("click-sound");
101 parameter_changed ("click-emphasis-sound");
106 void click_browse_clicked ()
108 SoundFileChooser sfdb (_("Choose Click"));
110 if (sfdb.run () == RESPONSE_OK) {
111 click_chosen (sfdb.get_filename());
115 void click_chosen (string const & path)
117 _click_path_entry.set_text (path);
118 _rc_config->set_click_sound (path);
121 void click_changed ()
123 click_chosen (_click_path_entry.get_text ());
126 void click_emphasis_browse_clicked ()
128 SoundFileChooser sfdb (_("Choose Click Emphasis"));
133 if (sfdb.run () == RESPONSE_OK) {
134 click_emphasis_chosen (sfdb.get_filename());
138 void click_emphasis_chosen (string const & path)
140 _click_emphasis_path_entry.set_text (path);
141 _rc_config->set_click_emphasis_sound (path);
144 void click_emphasis_changed ()
146 click_emphasis_chosen (_click_emphasis_path_entry.get_text ());
149 RCConfiguration* _rc_config;
150 Gtk::Window* _parent;
151 Entry _click_path_entry;
152 Entry _click_emphasis_path_entry;
155 class UndoOptions : public OptionEditorBox
158 UndoOptions (RCConfiguration* c) :
160 _limit_undo_button (_("Limit undo history to")),
161 _save_undo_button (_("Save undo history of"))
163 Table* t = new Table (2, 3);
166 t->attach (_limit_undo_button, 0, 1, 0, 1, FILL);
167 _limit_undo_spin.set_range (0, 512);
168 _limit_undo_spin.set_increments (1, 10);
169 t->attach (_limit_undo_spin, 1, 2, 0, 1, FILL | EXPAND);
170 Label* l = manage (left_aligned_label (_("commands")));
171 t->attach (*l, 2, 3, 0, 1);
173 t->attach (_save_undo_button, 0, 1, 1, 2, FILL);
174 _save_undo_spin.set_range (0, 512);
175 _save_undo_spin.set_increments (1, 10);
176 t->attach (_save_undo_spin, 1, 2, 1, 2, FILL | EXPAND);
177 l = manage (left_aligned_label (_("commands")));
178 t->attach (*l, 2, 3, 1, 2);
180 _box->pack_start (*t);
182 _limit_undo_button.signal_toggled().connect (sigc::mem_fun (*this, &UndoOptions::limit_undo_toggled));
183 _limit_undo_spin.signal_value_changed().connect (sigc::mem_fun (*this, &UndoOptions::limit_undo_changed));
184 _save_undo_button.signal_toggled().connect (sigc::mem_fun (*this, &UndoOptions::save_undo_toggled));
185 _save_undo_spin.signal_value_changed().connect (sigc::mem_fun (*this, &UndoOptions::save_undo_changed));
188 void parameter_changed (string const & p)
190 if (p == "history-depth") {
191 int32_t const d = _rc_config->get_history_depth();
192 _limit_undo_button.set_active (d != 0);
193 _limit_undo_spin.set_sensitive (d != 0);
194 _limit_undo_spin.set_value (d);
195 } else if (p == "save-history") {
196 bool const x = _rc_config->get_save_history ();
197 _save_undo_button.set_active (x);
198 _save_undo_spin.set_sensitive (x);
199 } else if (p == "save-history-depth") {
200 _save_undo_spin.set_value (_rc_config->get_saved_history_depth());
204 void set_state_from_config ()
206 parameter_changed ("save-history");
207 parameter_changed ("history-depth");
208 parameter_changed ("save-history-depth");
211 void limit_undo_toggled ()
213 bool const x = _limit_undo_button.get_active ();
214 _limit_undo_spin.set_sensitive (x);
215 int32_t const n = x ? 16 : 0;
216 _limit_undo_spin.set_value (n);
217 _rc_config->set_history_depth (n);
220 void limit_undo_changed ()
222 _rc_config->set_history_depth (_limit_undo_spin.get_value_as_int ());
225 void save_undo_toggled ()
227 bool const x = _save_undo_button.get_active ();
228 _rc_config->set_save_history (x);
231 void save_undo_changed ()
233 _rc_config->set_saved_history_depth (_save_undo_spin.get_value_as_int ());
237 RCConfiguration* _rc_config;
238 CheckButton _limit_undo_button;
239 SpinButton _limit_undo_spin;
240 CheckButton _save_undo_button;
241 SpinButton _save_undo_spin;
246 static const struct {
258 { "Key|Shift", GDK_SHIFT_MASK },
259 { "Command", GDK_META_MASK },
260 { "Control", GDK_CONTROL_MASK },
261 { "Option", GDK_MOD1_MASK },
262 { "Command-Shift", GDK_META_MASK|GDK_SHIFT_MASK },
263 { "Command-Option", GDK_MOD1_MASK|GDK_META_MASK },
264 { "Shift-Option", GDK_SHIFT_MASK|GDK_MOD1_MASK },
265 { "Shift-Command-Option", GDK_MOD5_MASK|GDK_SHIFT_MASK|GDK_META_MASK },
268 { "Key|Shift", GDK_SHIFT_MASK },
269 { "Control", GDK_CONTROL_MASK },
270 { "Alt (Mod1)", GDK_MOD1_MASK },
271 { "Control-Shift", GDK_CONTROL_MASK|GDK_SHIFT_MASK },
272 { "Control-Alt", GDK_CONTROL_MASK|GDK_MOD1_MASK },
273 { "Shift-Alt", GDK_SHIFT_MASK|GDK_MOD1_MASK },
274 { "Control-Shift-Alt", GDK_CONTROL_MASK|GDK_SHIFT_MASK|GDK_MOD1_MASK },
275 { "Mod2", GDK_MOD2_MASK },
276 { "Mod3", GDK_MOD3_MASK },
277 { "Mod4", GDK_MOD4_MASK },
278 { "Mod5", GDK_MOD5_MASK },
284 class KeyboardOptions : public OptionEditorBox
288 _delete_button_adjustment (3, 1, 12),
289 _delete_button_spin (_delete_button_adjustment),
290 _edit_button_adjustment (3, 1, 5),
291 _edit_button_spin (_edit_button_adjustment),
292 _insert_note_button_adjustment (3, 1, 5),
293 _insert_note_button_spin (_insert_note_button_adjustment)
295 /* internationalize and prepare for use with combos */
298 for (int i = 0; modifiers[i].name; ++i) {
299 dumb.push_back (S_(modifiers[i].name));
302 set_popdown_strings (_edit_modifier_combo, dumb);
303 _edit_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::edit_modifier_chosen));
305 for (int x = 0; modifiers[x].name; ++x) {
306 if (modifiers[x].modifier == Keyboard::edit_modifier ()) {
307 _edit_modifier_combo.set_active_text (S_(modifiers[x].name));
312 Table* t = manage (new Table (4, 4));
315 Label* l = manage (left_aligned_label (_("Edit using:")));
316 l->set_name ("OptionsLabel");
318 t->attach (*l, 0, 1, 0, 1, FILL | EXPAND, FILL);
319 t->attach (_edit_modifier_combo, 1, 2, 0, 1, FILL | EXPAND, FILL);
321 l = manage (new Label (_("+ button")));
322 l->set_name ("OptionsLabel");
324 t->attach (*l, 3, 4, 0, 1, FILL | EXPAND, FILL);
325 t->attach (_edit_button_spin, 4, 5, 0, 1, FILL | EXPAND, FILL);
327 _edit_button_spin.set_name ("OptionsEntry");
328 _edit_button_adjustment.set_value (Keyboard::edit_button());
329 _edit_button_adjustment.signal_value_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::edit_button_changed));
331 set_popdown_strings (_delete_modifier_combo, dumb);
332 _delete_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::delete_modifier_chosen));
334 for (int x = 0; modifiers[x].name; ++x) {
335 if (modifiers[x].modifier == Keyboard::delete_modifier ()) {
336 _delete_modifier_combo.set_active_text (S_(modifiers[x].name));
341 l = manage (left_aligned_label (_("Delete using:")));
342 l->set_name ("OptionsLabel");
344 t->attach (*l, 0, 1, 1, 2, FILL | EXPAND, FILL);
345 t->attach (_delete_modifier_combo, 1, 2, 1, 2, FILL | EXPAND, FILL);
347 l = manage (new Label (_("+ button")));
348 l->set_name ("OptionsLabel");
350 t->attach (*l, 3, 4, 1, 2, FILL | EXPAND, FILL);
351 t->attach (_delete_button_spin, 4, 5, 1, 2, FILL | EXPAND, FILL);
353 _delete_button_spin.set_name ("OptionsEntry");
354 _delete_button_adjustment.set_value (Keyboard::delete_button());
355 _delete_button_adjustment.signal_value_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::delete_button_changed));
358 set_popdown_strings (_insert_note_modifier_combo, dumb);
359 _insert_note_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::insert_note_modifier_chosen));
361 for (int x = 0; modifiers[x].name; ++x) {
362 if (modifiers[x].modifier == Keyboard::insert_note_modifier ()) {
363 _insert_note_modifier_combo.set_active_text (S_(modifiers[x].name));
368 l = manage (left_aligned_label (_("Insert note using:")));
369 l->set_name ("OptionsLabel");
371 t->attach (*l, 0, 1, 2, 3, FILL | EXPAND, FILL);
372 t->attach (_insert_note_modifier_combo, 1, 2, 2, 3, FILL | EXPAND, FILL);
374 l = manage (new Label (_("+ button")));
375 l->set_name ("OptionsLabel");
377 t->attach (*l, 3, 4, 2, 3, FILL | EXPAND, FILL);
378 t->attach (_insert_note_button_spin, 4, 5, 2, 3, FILL | EXPAND, FILL);
380 _insert_note_button_spin.set_name ("OptionsEntry");
381 _insert_note_button_adjustment.set_value (Keyboard::insert_note_button());
382 _insert_note_button_adjustment.signal_value_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::insert_note_button_changed));
385 set_popdown_strings (_snap_modifier_combo, dumb);
386 _snap_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::snap_modifier_chosen));
388 for (int x = 0; modifiers[x].name; ++x) {
389 if (modifiers[x].modifier == (guint) Keyboard::snap_modifier ()) {
390 _snap_modifier_combo.set_active_text (S_(modifiers[x].name));
395 l = manage (left_aligned_label (_("Ignore snap using:")));
396 l->set_name ("OptionsLabel");
398 t->attach (*l, 0, 1, 3, 4, FILL | EXPAND, FILL);
399 t->attach (_snap_modifier_combo, 1, 2, 3, 4, FILL | EXPAND, FILL);
403 for (map<string,string>::iterator bf = Keyboard::binding_files.begin(); bf != Keyboard::binding_files.end(); ++bf) {
404 strs.push_back (bf->first);
407 set_popdown_strings (_keyboard_layout_selector, strs);
408 _keyboard_layout_selector.set_active_text (Keyboard::current_binding_name());
409 _keyboard_layout_selector.signal_changed().connect (sigc::mem_fun (*this, &KeyboardOptions::bindings_changed));
411 l = manage (left_aligned_label (_("Keyboard layout:")));
412 l->set_name ("OptionsLabel");
414 t->attach (*l, 0, 1, 4, 5, FILL | EXPAND, FILL);
415 t->attach (_keyboard_layout_selector, 1, 2, 4, 5, FILL | EXPAND, FILL);
417 _box->pack_start (*t, false, false);
420 void parameter_changed (string const &)
422 /* XXX: these aren't really config options... */
425 void set_state_from_config ()
427 /* XXX: these aren't really config options... */
432 void bindings_changed ()
434 string const txt = _keyboard_layout_selector.get_active_text();
436 /* XXX: config...? for all this keyboard stuff */
438 for (map<string,string>::iterator i = Keyboard::binding_files.begin(); i != Keyboard::binding_files.end(); ++i) {
439 if (txt == i->first) {
440 if (Keyboard::load_keybindings (i->second)) {
441 Keyboard::save_keybindings ();
447 void edit_modifier_chosen ()
449 string const txt = _edit_modifier_combo.get_active_text();
451 for (int i = 0; modifiers[i].name; ++i) {
452 if (txt == _(modifiers[i].name)) {
453 Keyboard::set_edit_modifier (modifiers[i].modifier);
459 void delete_modifier_chosen ()
461 string const txt = _delete_modifier_combo.get_active_text();
463 for (int i = 0; modifiers[i].name; ++i) {
464 if (txt == _(modifiers[i].name)) {
465 Keyboard::set_delete_modifier (modifiers[i].modifier);
471 void insert_note_modifier_chosen ()
473 string const txt = _insert_note_modifier_combo.get_active_text();
475 for (int i = 0; modifiers[i].name; ++i) {
476 if (txt == _(modifiers[i].name)) {
477 Keyboard::set_insert_note_modifier (modifiers[i].modifier);
483 void snap_modifier_chosen ()
485 string const txt = _snap_modifier_combo.get_active_text();
487 for (int i = 0; modifiers[i].name; ++i) {
488 if (txt == _(modifiers[i].name)) {
489 Keyboard::set_snap_modifier (modifiers[i].modifier);
495 void delete_button_changed ()
497 Keyboard::set_delete_button (_delete_button_spin.get_value_as_int());
500 void edit_button_changed ()
502 Keyboard::set_edit_button (_edit_button_spin.get_value_as_int());
505 void insert_note_button_changed ()
507 Keyboard::set_insert_note_button (_insert_note_button_spin.get_value_as_int());
510 ComboBoxText _keyboard_layout_selector;
511 ComboBoxText _edit_modifier_combo;
512 ComboBoxText _delete_modifier_combo;
513 ComboBoxText _insert_note_modifier_combo;
514 ComboBoxText _snap_modifier_combo;
515 Adjustment _delete_button_adjustment;
516 SpinButton _delete_button_spin;
517 Adjustment _edit_button_adjustment;
518 SpinButton _edit_button_spin;
519 Adjustment _insert_note_button_adjustment;
520 SpinButton _insert_note_button_spin;
524 class FontScalingOptions : public OptionEditorBox
527 FontScalingOptions (RCConfiguration* c) :
529 _dpi_adjustment (50, 50, 250, 1, 10),
530 _dpi_slider (_dpi_adjustment)
532 _dpi_adjustment.set_value (floor (_rc_config->get_font_scale () / 1024));
534 Label* l = manage (new Label (_("Font scaling:")));
535 l->set_name ("OptionsLabel");
537 _dpi_slider.set_update_policy (UPDATE_DISCONTINUOUS);
538 HBox* h = manage (new HBox);
540 h->pack_start (*l, false, false);
541 h->pack_start (_dpi_slider, true, true);
543 _box->pack_start (*h, false, false);
545 _dpi_adjustment.signal_value_changed().connect (sigc::mem_fun (*this, &FontScalingOptions::dpi_changed));
548 void parameter_changed (string const & p)
550 if (p == "font-scale") {
551 _dpi_adjustment.set_value (floor (_rc_config->get_font_scale() / 1024));
555 void set_state_from_config ()
557 parameter_changed ("font-scale");
564 _rc_config->set_font_scale ((long) floor (_dpi_adjustment.get_value() * 1024));
565 /* XXX: should be triggered from the parameter changed signal */
569 RCConfiguration* _rc_config;
570 Adjustment _dpi_adjustment;
574 class BufferingOptions : public OptionEditorBox
577 BufferingOptions (RCConfiguration* c)
579 , _playback_adjustment (5, 1, 60, 1, 4)
580 , _capture_adjustment (5, 1, 60, 1, 4)
581 , _playback_slider (_playback_adjustment)
582 , _capture_slider (_capture_adjustment)
584 _playback_adjustment.set_value (_rc_config->get_audio_playback_buffer_seconds());
586 Label* l = manage (new Label (_("Playback (seconds of buffering):")));
587 l->set_name ("OptionsLabel");
589 _playback_slider.set_update_policy (UPDATE_DISCONTINUOUS);
590 HBox* h = manage (new HBox);
592 h->pack_start (*l, false, false);
593 h->pack_start (_playback_slider, true, true);
595 _box->pack_start (*h, false, false);
597 _capture_adjustment.set_value (_rc_config->get_audio_capture_buffer_seconds());
599 l = manage (new Label (_("Recording (seconds of buffering):")));
600 l->set_name ("OptionsLabel");
602 _capture_slider.set_update_policy (UPDATE_DISCONTINUOUS);
603 h = manage (new HBox);
605 h->pack_start (*l, false, false);
606 h->pack_start (_capture_slider, true, true);
608 _box->pack_start (*h, false, false);
610 _capture_adjustment.signal_value_changed().connect (sigc::mem_fun (*this, &BufferingOptions::capture_changed));
611 _playback_adjustment.signal_value_changed().connect (sigc::mem_fun (*this, &BufferingOptions::playback_changed));
614 void parameter_changed (string const & p)
616 if (p == "playback-buffer-seconds") {
617 _playback_adjustment.set_value (_rc_config->get_audio_playback_buffer_seconds());
618 } else if (p == "capture-buffer-seconds") {
619 _capture_adjustment.set_value (_rc_config->get_audio_capture_buffer_seconds());
623 void set_state_from_config ()
625 parameter_changed ("playback-buffer-seconds");
626 parameter_changed ("capture-buffer-seconds");
631 void playback_changed ()
633 _rc_config->set_audio_playback_buffer_seconds ((long) _playback_adjustment.get_value());
636 void capture_changed ()
638 _rc_config->set_audio_capture_buffer_seconds ((long) _capture_adjustment.get_value());
641 RCConfiguration* _rc_config;
642 Adjustment _playback_adjustment;
643 Adjustment _capture_adjustment;
644 HScale _playback_slider;
645 HScale _capture_slider;
648 class ControlSurfacesOptions : public OptionEditorBox
651 ControlSurfacesOptions (Gtk::Window& parent)
654 _store = ListStore::create (_model);
655 _view.set_model (_store);
656 _view.append_column (_("Name"), _model.name);
657 _view.get_column(0)->set_resizable (true);
658 _view.get_column(0)->set_expand (true);
659 _view.append_column_editable (_("Enabled"), _model.enabled);
660 _view.append_column_editable (_("Feedback"), _model.feedback);
662 _box->pack_start (_view, false, false);
664 Label* label = manage (new Label);
665 label->set_markup (string_compose (X_("<i>%1</i>"), _("Double-click on a name to edit settings for an enabled protocol")));
667 _box->pack_start (*label, false, false);
670 ControlProtocolManager& m = ControlProtocolManager::instance ();
671 m.ProtocolStatusChange.connect (protocol_status_connection, MISSING_INVALIDATOR,
672 boost::bind (&ControlSurfacesOptions::protocol_status_changed, this, _1), gui_context());
674 _store->signal_row_changed().connect (sigc::mem_fun (*this, &ControlSurfacesOptions::view_changed));
675 _view.signal_button_press_event().connect_notify (sigc::mem_fun(*this, &ControlSurfacesOptions::edit_clicked));
678 void parameter_changed (std::string const &)
683 void set_state_from_config ()
687 ControlProtocolManager& m = ControlProtocolManager::instance ();
688 for (list<ControlProtocolInfo*>::iterator i = m.control_protocol_info.begin(); i != m.control_protocol_info.end(); ++i) {
690 if (!(*i)->mandatory) {
691 TreeModel::Row r = *_store->append ();
692 r[_model.name] = (*i)->name;
693 r[_model.enabled] = ((*i)->protocol || (*i)->requested);
694 r[_model.feedback] = ((*i)->protocol && (*i)->protocol->get_feedback ());
695 r[_model.protocol_info] = *i;
702 void protocol_status_changed (ControlProtocolInfo* cpi) {
704 TreeModel::Children rows = _store->children();
705 for (TreeModel::Children::iterator x = rows.begin(); x != rows.end(); ++x) {
706 if ((*x)[_model.protocol_info] == cpi) {
707 (*x)[_model.enabled] = (cpi->protocol || cpi->requested);
713 void view_changed (TreeModel::Path const &, TreeModel::iterator const & i)
715 TreeModel::Row r = *i;
717 ControlProtocolInfo* cpi = r[_model.protocol_info];
722 bool const was_enabled = (cpi->protocol != 0);
723 bool const is_enabled = r[_model.enabled];
725 if (was_enabled != is_enabled) {
727 ControlProtocolManager::instance().instantiate (*cpi);
729 Gtk::Window* win = r[_model.editor];
734 ControlProtocolManager::instance().teardown (*cpi);
739 r[_model.editor] = 0;
740 cpi->requested = false;
744 bool const was_feedback = (cpi->protocol && cpi->protocol->get_feedback ());
745 bool const is_feedback = r[_model.feedback];
747 if (was_feedback != is_feedback && cpi->protocol) {
748 cpi->protocol->set_feedback (is_feedback);
752 void edit_clicked (GdkEventButton* ev)
754 if (ev->type != GDK_2BUTTON_PRESS) {
759 ControlProtocolInfo* cpi;
762 row = *(_view.get_selection()->get_selected());
764 Window* win = row[_model.editor];
765 if (win && !win->is_visible()) {
768 cpi = row[_model.protocol_info];
770 if (cpi && cpi->protocol && cpi->protocol->has_editor ()) {
771 Box* box = (Box*) cpi->protocol->get_gui ();
773 string title = row[_model.name];
774 ArdourWindow* win = new ArdourWindow (_parent, title);
775 win->set_title ("Control Protocol Options");
779 row[_model.editor] = win;
785 class ControlSurfacesModelColumns : public TreeModelColumnRecord
789 ControlSurfacesModelColumns ()
798 TreeModelColumn<string> name;
799 TreeModelColumn<bool> enabled;
800 TreeModelColumn<bool> feedback;
801 TreeModelColumn<ControlProtocolInfo*> protocol_info;
802 TreeModelColumn<Gtk::Window*> editor;
805 Glib::RefPtr<ListStore> _store;
806 ControlSurfacesModelColumns _model;
808 Gtk::Window& _parent;
809 PBD::ScopedConnection protocol_status_connection;
812 /** A class which allows control of visibility of some editor components usign
813 * a VisibilityGroup. The caller should pass in a `dummy' VisibilityGroup
814 * which has the correct members, but with null widget pointers. This
815 * class allows the user to set visibility of the members, the details
816 * of which are stored in a configuration variable which can be watched
817 * by parts of the editor that actually contain the widgets whose visibility
818 * is being controlled.
821 class VisibilityOption : public Option
824 /** @param name User-visible name for this group.
825 * @param g `Dummy' VisibilityGroup (as described above).
826 * @param get Method to get the value of the appropriate configuration variable.
827 * @param set Method to set the value of the appropriate configuration variable.
829 VisibilityOption (string name, VisibilityGroup* g, sigc::slot<string> get, sigc::slot<bool, string> set)
830 : Option (g->get_state_name(), name)
832 , _visibility_group (g)
836 /* Watch for changes made by the user to our members */
837 _visibility_group->VisibilityChanged.connect_same_thread (
838 _visibility_group_connection, sigc::bind (&VisibilityOption::changed, this)
842 void set_state_from_config ()
844 /* Set our state from the current configuration */
845 _visibility_group->set_state (_get ());
848 void add_to_page (OptionEditorPage* p)
850 _heading.add_to_page (p);
851 add_widget_to_page (p, _visibility_group->list_view ());
854 Gtk::Widget& tip_widget() { return *_visibility_group->list_view (); }
859 /* The user has changed something, so reflect this change
860 in the RCConfiguration.
862 _set (_visibility_group->get_state_value ());
865 OptionEditorHeading _heading;
866 VisibilityGroup* _visibility_group;
867 sigc::slot<std::string> _get;
868 sigc::slot<bool, std::string> _set;
869 PBD::ScopedConnection _visibility_group_connection;
873 RCOptionEditor::RCOptionEditor ()
874 : OptionEditor (Config, string_compose (_("%1 Preferences"), PROGRAM_NAME))
875 , _rc_config (Config)
876 , _mixer_strip_visibility ("mixer-strip-visibility")
880 uint32_t hwcpus = hardware_concurrency ();
884 add_option (_("Misc"), new OptionEditorHeading (_("DSP CPU Utilization")));
886 ComboOption<int32_t>* procs = new ComboOption<int32_t> (
888 _("Signal processing uses"),
889 sigc::mem_fun (*_rc_config, &RCConfiguration::get_processor_usage),
890 sigc::mem_fun (*_rc_config, &RCConfiguration::set_processor_usage)
893 procs->add (-1, _("all but one processor"));
894 procs->add (0, _("all available processors"));
896 for (uint32_t i = 1; i <= hwcpus; ++i) {
897 procs->add (i, string_compose (_("%1 processors"), i));
900 procs->set_note (string_compose (_("This setting will only take effect when %1 is restarted."), PROGRAM_NAME));
902 add_option (_("Misc"), procs);
905 add_option (_("Misc"), new OptionEditorHeading (S_("Options|Undo")));
907 add_option (_("Misc"), new UndoOptions (_rc_config));
909 add_option (_("Misc"),
911 "verify-remove-last-capture",
912 _("Verify removal of last capture"),
913 sigc::mem_fun (*_rc_config, &RCConfiguration::get_verify_remove_last_capture),
914 sigc::mem_fun (*_rc_config, &RCConfiguration::set_verify_remove_last_capture)
917 add_option (_("Misc"),
919 "periodic-safety-backups",
920 _("Make periodic backups of the session file"),
921 sigc::mem_fun (*_rc_config, &RCConfiguration::get_periodic_safety_backups),
922 sigc::mem_fun (*_rc_config, &RCConfiguration::set_periodic_safety_backups)
925 add_option (_("Misc"), new OptionEditorHeading (_("Session Management")));
927 add_option (_("Misc"),
929 "only-copy-imported-files",
930 _("Always copy imported files"),
931 sigc::mem_fun (*_rc_config, &RCConfiguration::get_only_copy_imported_files),
932 sigc::mem_fun (*_rc_config, &RCConfiguration::set_only_copy_imported_files)
935 add_option (_("Misc"), new DirectoryOption (
936 X_("default-session-parent-dir"),
937 _("Default folder for new sessions:"),
938 sigc::mem_fun (*_rc_config, &RCConfiguration::get_default_session_parent_dir),
939 sigc::mem_fun (*_rc_config, &RCConfiguration::set_default_session_parent_dir)
942 add_option (_("Misc"),
943 new SpinOption<uint32_t> (
944 "max-recent-sessions",
945 _("Maximum number of recent sessions"),
946 sigc::mem_fun (*_rc_config, &RCConfiguration::get_max_recent_sessions),
947 sigc::mem_fun (*_rc_config, &RCConfiguration::set_max_recent_sessions),
951 add_option (_("Misc"), new OptionEditorHeading (_("Click")));
953 add_option (_("Misc"), new ClickOptions (_rc_config, this));
955 add_option (_("Misc"),
958 _("Click gain level"),
959 sigc::mem_fun (*_rc_config, &RCConfiguration::get_click_gain),
960 sigc::mem_fun (*_rc_config, &RCConfiguration::set_click_gain)
963 add_option (_("Misc"), new OptionEditorHeading (_("Automation")));
965 add_option (_("Misc"),
966 new SpinOption<double> (
967 "automation-thinning-factor",
968 _("Thinning factor (larger value => less data)"),
969 sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_thinning_factor),
970 sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_thinning_factor),
974 add_option (_("Misc"),
975 new SpinOption<double> (
976 "automation-interval-msecs",
977 _("Automation sampling interval (milliseconds)"),
978 sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_interval_msecs),
979 sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_interval_msecs),
987 tsf = new BoolOption (
988 "latched-record-enable",
989 _("Keep record-enable engaged on stop"),
990 sigc::mem_fun (*_rc_config, &RCConfiguration::get_latched_record_enable),
991 sigc::mem_fun (*_rc_config, &RCConfiguration::set_latched_record_enable)
993 // Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _(""));
994 add_option (_("Transport"), tsf);
996 tsf = new BoolOption (
997 "stop-recording-on-xrun",
998 _("Stop recording when an xrun occurs"),
999 sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_recording_on_xrun),
1000 sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_recording_on_xrun)
1002 Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("<b>When enabled</b> Ardour will stop recording if an over- or underrun is detected by the audio engine"));
1003 add_option (_("Transport"), tsf);
1005 tsf = new BoolOption (
1006 "create-xrun-marker",
1007 _("Create markers where xruns occur"),
1008 sigc::mem_fun (*_rc_config, &RCConfiguration::get_create_xrun_marker),
1009 sigc::mem_fun (*_rc_config, &RCConfiguration::set_create_xrun_marker)
1011 // Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _(""));
1012 add_option (_("Transport"), tsf);
1014 tsf = new BoolOption (
1015 "stop-at-session-end",
1016 _("Stop at the end of the session"),
1017 sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_at_session_end),
1018 sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_at_session_end)
1020 Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("<b>When enabled</b> if Ardour is <b>not recording</b>, it will stop the transport "
1021 "when it reaches the current session end marker\n\n"
1022 "<b>When disabled</b> Ardour will continue to roll past the session end marker at all times"));
1023 add_option (_("Transport"), tsf);
1025 tsf = new BoolOption (
1027 _("Do seamless looping (not possible when slaved to MTC, JACK etc)"),
1028 sigc::mem_fun (*_rc_config, &RCConfiguration::get_seamless_loop),
1029 sigc::mem_fun (*_rc_config, &RCConfiguration::set_seamless_loop)
1031 Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("<b>When enabled</b> this will loop by reading ahead and wrapping around at the loop point, "
1032 "preventing any need to do a transport locate at the end of the loop\n\n"
1033 "<b>When disabled</b> looping is done by locating back to the start of the loop when Ardour reaches the end "
1034 "which will often cause a small click or delay"));
1035 add_option (_("Transport"), tsf);
1037 tsf = new BoolOption (
1038 "disable-disarm-during-roll",
1039 _("Disable per-track record disarm while rolling"),
1040 sigc::mem_fun (*_rc_config, &RCConfiguration::get_disable_disarm_during_roll),
1041 sigc::mem_fun (*_rc_config, &RCConfiguration::set_disable_disarm_during_roll)
1043 Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("<b>When enabled</b> this will prevent you from accidentally stopping specific tracks recording during a take"));
1044 add_option (_("Transport"), tsf);
1046 tsf = new BoolOption (
1048 _("12dB gain reduction during fast-forward and fast-rewind"),
1049 sigc::mem_fun (*_rc_config, &RCConfiguration::get_quieten_at_speed),
1050 sigc::mem_fun (*_rc_config, &RCConfiguration::set_quieten_at_speed)
1052 Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("This will reduce the unpleasant increase in perceived volume "
1053 "that occurs when fast-forwarding or rewinding through some kinds of audio"));
1054 add_option (_("Transport"), tsf);
1056 add_option (_("Transport"), new OptionEditorHeading (S_("Sync/Slave")));
1058 _sync_source = new ComboOption<SyncSource> (
1060 _("External timecode source"),
1061 sigc::mem_fun (*_rc_config, &RCConfiguration::get_sync_source),
1062 sigc::mem_fun (*_rc_config, &RCConfiguration::set_sync_source)
1065 populate_sync_options ();
1066 add_option (_("Transport"), _sync_source);
1068 _sync_framerate = new BoolOption (
1069 "timecode-sync-frame-rate",
1070 _("Match session video frame rate to external timecode"),
1071 sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_sync_frame_rate),
1072 sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_sync_frame_rate)
1074 Gtkmm2ext::UI::instance()->set_tip
1075 (_sync_framerate->tip_widget(),
1076 _("This option controls the value of the video frame rate <i>while chasing</i> an external timecode source.\n\n"
1077 "<b>When enabled</b> the session video frame rate will be changed to match that of the selected external timecode source.\n\n"
1078 "<b>When disabled</b> the session video frame rate will not be changed to match that of the selected external timecode source."
1079 "Instead the frame rate indication in the main clock will flash red and Ardour will convert between the external "
1080 "timecode standard and the session standard."));
1082 add_option (_("Transport"), _sync_framerate);
1084 _sync_genlock = new BoolOption (
1085 "timecode-source-is-synced",
1086 _("External timecode is sync locked"),
1087 sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_is_synced),
1088 sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_is_synced)
1090 Gtkmm2ext::UI::instance()->set_tip
1091 (_sync_genlock->tip_widget(),
1092 _("<b>When enabled</b> indicates that the selected external timecode source shares sync (Black & Burst, Wordclock, etc) with the audio interface."));
1095 add_option (_("Transport"), _sync_genlock);
1097 _sync_source_2997 = new BoolOption (
1098 "timecode-source-2997",
1099 _("Lock to 29.9700 fps instead of 30000/1001"),
1100 sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_2997),
1101 sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_2997)
1103 Gtkmm2ext::UI::instance()->set_tip
1104 (_sync_source_2997->tip_widget(),
1105 _("<b>When enabled</b> the external timecode source is assumed to use 29.97 fps instead of 30000/1001.\n"
1106 "SMPTE 12M-1999 specifies 29.97df as 30000/1001. The spec further mentions that "
1107 "drop-frame timecode has an accumulated error of -86ms over a 24-hour period.\n"
1108 "Drop-frame timecode would compensate exactly for a NTSC color frame rate of 30 * 0.9990 (ie 29.970000). "
1109 "That is not the actual rate, however some vendor use that rate - despite it being against the specs - "
1110 "because the variant of using exactly 29.97 fps has zero timecode drift.\n"
1113 add_option (_("Transport"), _sync_source_2997);
1115 add_option (_("Transport"), new OptionEditorHeading (S_("LTC Reader")));
1117 _ltc_port = new ComboStringOption (
1119 _("LTC incoming port"),
1120 sigc::mem_fun (*_rc_config, &RCConfiguration::get_ltc_source_port),
1121 sigc::mem_fun (*_rc_config, &RCConfiguration::set_ltc_source_port)
1124 vector<string> physical_inputs;
1125 physical_inputs.push_back (_("None"));
1126 AudioEngine::instance()->get_physical_inputs (DataType::AUDIO, physical_inputs);
1127 _ltc_port->set_popdown_strings (physical_inputs);
1129 add_option (_("Transport"), _ltc_port);
1132 // TODO; rather disable this button than not compile it..
1133 add_option (_("Transport"), new OptionEditorHeading (S_("LTC Generator")));
1135 add_option (_("Transport"),
1138 _("Enable LTC generator"),
1139 sigc::mem_fun (*_rc_config, &RCConfiguration::get_send_ltc),
1140 sigc::mem_fun (*_rc_config, &RCConfiguration::set_send_ltc)
1143 _ltc_send_continuously = new BoolOption (
1144 "ltc-send-continuously",
1145 _("send LTC while stopped"),
1146 sigc::mem_fun (*_rc_config, &RCConfiguration::get_ltc_send_continuously),
1147 sigc::mem_fun (*_rc_config, &RCConfiguration::set_ltc_send_continuously)
1149 Gtkmm2ext::UI::instance()->set_tip
1150 (_ltc_send_continuously->tip_widget(),
1151 _("<b>When enabled</b> Ardour will continue to send LTC information even when the transport (playhead) is not moving"));
1152 add_option (_("Transport"), _ltc_send_continuously);
1154 _ltc_volume_adjustment = new Gtk::Adjustment(-18, -50, 0, .5, 5);
1155 _ltc_volume_adjustment->set_value (20 * log10(_rc_config->get_ltc_output_volume()));
1156 _ltc_volume_adjustment->signal_value_changed().connect (sigc::mem_fun (*this, &RCOptionEditor::ltc_generator_volume_changed));
1157 _ltc_volume_slider = new HSliderOption("ltcvol", ("LTC generator level:"), *_ltc_volume_adjustment);
1159 Gtkmm2ext::UI::instance()->set_tip
1160 (_ltc_volume_slider->tip_widget(),
1161 _("Specify the Peak Volume of the generated LTC signal in dbFS. A good value is 0dBu ^= -18dbFS in an EBU calibrated system"));
1163 add_option (_("Transport"), _ltc_volume_slider);
1164 parameter_changed ("send-ltc");
1167 parameter_changed ("sync-source");
1171 add_option (_("Editor"),
1173 "link-region-and-track-selection",
1174 _("Link selection of regions and tracks"),
1175 sigc::mem_fun (*_rc_config, &RCConfiguration::get_link_region_and_track_selection),
1176 sigc::mem_fun (*_rc_config, &RCConfiguration::set_link_region_and_track_selection)
1179 add_option (_("Editor"),
1181 "automation-follows-regions",
1182 _("Move relevant automation when audio regions are moved"),
1183 sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_follows_regions),
1184 sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_follows_regions)
1187 add_option (_("Editor"),
1189 "show-track-meters",
1190 _("Show meters on tracks in the editor"),
1191 sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_track_meters),
1192 sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_track_meters)
1195 bo = new BoolOption (
1196 "use-overlap-equivalency",
1197 _("Use overlap equivalency for regions"),
1198 sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_overlap_equivalency),
1199 sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_overlap_equivalency)
1202 add_option (_("Editor"), bo);
1203 Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
1204 string_compose (_("When extending region selection across a group, %1 must decide which regions are equivalent"
1205 "\n\nIf enabled, regions are considered \"equivalent\" if they overlap on the timeline."
1206 "\n\nIf disabled, regions are considered \"equivalent\" only if have the same start time, length and position"),
1209 add_option (_("Editor"),
1211 "rubberbanding-snaps-to-grid",
1212 _("Make rubberband selection rectangle snap to the grid"),
1213 sigc::mem_fun (*_rc_config, &RCConfiguration::get_rubberbanding_snaps_to_grid),
1214 sigc::mem_fun (*_rc_config, &RCConfiguration::set_rubberbanding_snaps_to_grid)
1217 add_option (_("Editor"),
1220 _("Show waveforms in regions"),
1221 sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_waveforms),
1222 sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_waveforms)
1225 add_option (_("Editor"),
1226 new BoolComboOption (
1227 "show-region-gain-envelopes",
1228 _("Show gain envelopes in audio regions"),
1230 _("only in region gain mode"),
1231 sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_region_gain),
1232 sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_region_gain)
1235 ComboOption<WaveformScale>* wfs = new ComboOption<WaveformScale> (
1237 _("Waveform scale"),
1238 sigc::mem_fun (*_rc_config, &RCConfiguration::get_waveform_scale),
1239 sigc::mem_fun (*_rc_config, &RCConfiguration::set_waveform_scale)
1242 wfs->add (Linear, _("linear"));
1243 wfs->add (Logarithmic, _("logarithmic"));
1245 add_option (_("Editor"), wfs);
1247 ComboOption<WaveformShape>* wfsh = new ComboOption<WaveformShape> (
1249 _("Waveform shape"),
1250 sigc::mem_fun (*_rc_config, &RCConfiguration::get_waveform_shape),
1251 sigc::mem_fun (*_rc_config, &RCConfiguration::set_waveform_shape)
1254 wfsh->add (Traditional, _("traditional"));
1255 wfsh->add (Rectified, _("rectified"));
1257 add_option (_("Editor"), wfsh);
1259 add_option (_("Editor"),
1261 "show-waveforms-while-recording",
1262 _("Show waveforms for audio while it is being recorded"),
1263 sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_waveforms_while_recording),
1264 sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_waveforms_while_recording)
1267 add_option (_("Editor"),
1270 _("Show zoom toolbar"),
1271 sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_zoom_tools),
1272 sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_zoom_tools)
1275 add_option (_("Editor"),
1277 "color-regions-using-track-color",
1278 _("Color regions using their track's color"),
1279 sigc::mem_fun (*_rc_config, &RCConfiguration::get_color_regions_using_track_color),
1280 sigc::mem_fun (*_rc_config, &RCConfiguration::set_color_regions_using_track_color)
1283 add_option (_("Editor"),
1285 "update-editor-during-summary-drag",
1286 _("Update editor window during drags of the summary"),
1287 sigc::mem_fun (*_rc_config, &RCConfiguration::get_update_editor_during_summary_drag),
1288 sigc::mem_fun (*_rc_config, &RCConfiguration::set_update_editor_during_summary_drag)
1291 add_option (_("Editor"),
1293 "sync-all-route-ordering",
1294 _("Synchronise editor and mixer track order"),
1295 sigc::mem_fun (*_rc_config, &RCConfiguration::get_sync_all_route_ordering),
1296 sigc::mem_fun (*_rc_config, &RCConfiguration::set_sync_all_route_ordering)
1299 add_option (_("Editor"),
1301 "link-editor-and-mixer-selection",
1302 _("Synchronise editor and mixer selection"),
1303 sigc::mem_fun (*_rc_config, &RCConfiguration::get_link_editor_and_mixer_selection),
1304 sigc::mem_fun (*_rc_config, &RCConfiguration::set_link_editor_and_mixer_selection)
1307 bo = new BoolOption (
1309 _("Name new markers"),
1310 sigc::mem_fun (*_rc_config, &RCConfiguration::get_name_new_markers),
1311 sigc::mem_fun (*_rc_config, &RCConfiguration::set_name_new_markers)
1314 add_option (_("Editor"), bo);
1315 Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(), _("If enabled, popup a dialog when a new marker is created to allow its name to be set as it is created."
1316 "\n\nYou can always rename markers by right-clicking on them"));
1318 add_option (_("Editor"),
1320 "autoscroll-editor",
1321 _("Auto-scroll editor window when dragging near its edges"),
1322 sigc::mem_fun (*_rc_config, &RCConfiguration::get_autoscroll_editor),
1323 sigc::mem_fun (*_rc_config, &RCConfiguration::set_autoscroll_editor)
1328 add_option (_("Audio"), new OptionEditorHeading (_("Buffering")));
1330 add_option (_("Audio"), new BufferingOptions (_rc_config));
1332 add_option (_("Audio"), new OptionEditorHeading (_("Monitoring")));
1334 add_option (_("Audio"),
1337 _("Use a monitor bus (allows AFL/PFL and more control)"),
1338 sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_monitor_bus),
1339 sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_monitor_bus)
1342 ComboOption<MonitorModel>* mm = new ComboOption<MonitorModel> (
1344 _("Record monitoring handled by"),
1345 sigc::mem_fun (*_rc_config, &RCConfiguration::get_monitoring_model),
1346 sigc::mem_fun (*_rc_config, &RCConfiguration::set_monitoring_model)
1350 /* no JACK monitoring on CoreAudio */
1351 if (AudioEngine::instance()->can_request_hardware_monitoring()) {
1352 mm->add (HardwareMonitoring, _("JACK"));
1355 mm->add (SoftwareMonitoring, _("ardour"));
1356 mm->add (ExternalMonitoring, _("audio hardware"));
1358 add_option (_("Audio"), mm);
1360 add_option (_("Audio"),
1362 "tape-machine-mode",
1363 _("Tape machine mode"),
1364 sigc::mem_fun (*_rc_config, &RCConfiguration::get_tape_machine_mode),
1365 sigc::mem_fun (*_rc_config, &RCConfiguration::set_tape_machine_mode)
1368 add_option (_("Audio"), new OptionEditorHeading (_("Connection of tracks and busses")));
1370 add_option (_("Audio"),
1372 "auto-connect-standard-busses",
1373 _("Auto-connect master/monitor busses"),
1374 sigc::mem_fun (*_rc_config, &RCConfiguration::get_auto_connect_standard_busses),
1375 sigc::mem_fun (*_rc_config, &RCConfiguration::set_auto_connect_standard_busses)
1378 ComboOption<AutoConnectOption>* iac = new ComboOption<AutoConnectOption> (
1379 "input-auto-connect",
1380 _("Connect track inputs"),
1381 sigc::mem_fun (*_rc_config, &RCConfiguration::get_input_auto_connect),
1382 sigc::mem_fun (*_rc_config, &RCConfiguration::set_input_auto_connect)
1385 iac->add (AutoConnectPhysical, _("automatically to physical inputs"));
1386 iac->add (ManualConnect, _("manually"));
1388 add_option (_("Audio"), iac);
1390 ComboOption<AutoConnectOption>* oac = new ComboOption<AutoConnectOption> (
1391 "output-auto-connect",
1392 _("Connect track and bus outputs"),
1393 sigc::mem_fun (*_rc_config, &RCConfiguration::get_output_auto_connect),
1394 sigc::mem_fun (*_rc_config, &RCConfiguration::set_output_auto_connect)
1397 oac->add (AutoConnectPhysical, _("automatically to physical outputs"));
1398 oac->add (AutoConnectMaster, _("automatically to master bus"));
1399 oac->add (ManualConnect, _("manually"));
1401 add_option (_("Audio"), oac);
1403 add_option (_("Audio"), new OptionEditorHeading (_("Denormals")));
1405 add_option (_("Audio"),
1407 "denormal-protection",
1408 _("Use DC bias to protect against denormals"),
1409 sigc::mem_fun (*_rc_config, &RCConfiguration::get_denormal_protection),
1410 sigc::mem_fun (*_rc_config, &RCConfiguration::set_denormal_protection)
1413 ComboOption<DenormalModel>* dm = new ComboOption<DenormalModel> (
1415 _("Processor handling"),
1416 sigc::mem_fun (*_rc_config, &RCConfiguration::get_denormal_model),
1417 sigc::mem_fun (*_rc_config, &RCConfiguration::set_denormal_model)
1420 dm->add (DenormalNone, _("no processor handling"));
1424 if (fpu.has_flush_to_zero()) {
1425 dm->add (DenormalFTZ, _("use FlushToZero"));
1428 if (fpu.has_denormals_are_zero()) {
1429 dm->add (DenormalDAZ, _("use DenormalsAreZero"));
1432 if (fpu.has_flush_to_zero() && fpu.has_denormals_are_zero()) {
1433 dm->add (DenormalFTZDAZ, _("use FlushToZero and DenormalsAreZero"));
1436 add_option (_("Audio"), dm);
1438 add_option (_("Audio"), new OptionEditorHeading (_("Plugins")));
1440 add_option (_("Audio"),
1442 "plugins-stop-with-transport",
1443 _("Silence plugins when the transport is stopped"),
1444 sigc::mem_fun (*_rc_config, &RCConfiguration::get_plugins_stop_with_transport),
1445 sigc::mem_fun (*_rc_config, &RCConfiguration::set_plugins_stop_with_transport)
1448 add_option (_("Audio"),
1450 "new-plugins-active",
1451 _("Make new plugins active"),
1452 sigc::mem_fun (*_rc_config, &RCConfiguration::get_new_plugins_active),
1453 sigc::mem_fun (*_rc_config, &RCConfiguration::set_new_plugins_active)
1456 add_option (_("Audio"),
1458 "auto-analyse-audio",
1459 _("Enable automatic analysis of audio"),
1460 sigc::mem_fun (*_rc_config, &RCConfiguration::get_auto_analyse_audio),
1461 sigc::mem_fun (*_rc_config, &RCConfiguration::set_auto_analyse_audio)
1464 add_option (_("Audio"),
1466 "replicate-missing-region-channels",
1467 _("Replicate missing region channels"),
1468 sigc::mem_fun (*_rc_config, &RCConfiguration::get_replicate_missing_region_channels),
1469 sigc::mem_fun (*_rc_config, &RCConfiguration::set_replicate_missing_region_channels)
1474 add_option (_("Solo / mute"),
1477 _("Solo-in-place mute cut (dB)"),
1478 sigc::mem_fun (*_rc_config, &RCConfiguration::get_solo_mute_gain),
1479 sigc::mem_fun (*_rc_config, &RCConfiguration::set_solo_mute_gain)
1482 _solo_control_is_listen_control = new BoolOption (
1483 "solo-control-is-listen-control",
1484 _("Solo controls are Listen controls"),
1485 sigc::mem_fun (*_rc_config, &RCConfiguration::get_solo_control_is_listen_control),
1486 sigc::mem_fun (*_rc_config, &RCConfiguration::set_solo_control_is_listen_control)
1489 add_option (_("Solo / mute"), _solo_control_is_listen_control);
1491 _listen_position = new ComboOption<ListenPosition> (
1493 _("Listen Position"),
1494 sigc::mem_fun (*_rc_config, &RCConfiguration::get_listen_position),
1495 sigc::mem_fun (*_rc_config, &RCConfiguration::set_listen_position)
1498 _listen_position->add (AfterFaderListen, _("after-fader (AFL)"));
1499 _listen_position->add (PreFaderListen, _("pre-fader (PFL)"));
1501 add_option (_("Solo / mute"), _listen_position);
1503 ComboOption<PFLPosition>* pp = new ComboOption<PFLPosition> (
1505 _("PFL signals come from"),
1506 sigc::mem_fun (*_rc_config, &RCConfiguration::get_pfl_position),
1507 sigc::mem_fun (*_rc_config, &RCConfiguration::set_pfl_position)
1510 pp->add (PFLFromBeforeProcessors, _("before pre-fader processors"));
1511 pp->add (PFLFromAfterProcessors, _("pre-fader but after pre-fader processors"));
1513 add_option (_("Solo / mute"), pp);
1515 ComboOption<AFLPosition>* pa = new ComboOption<AFLPosition> (
1517 _("AFL signals come from"),
1518 sigc::mem_fun (*_rc_config, &RCConfiguration::get_afl_position),
1519 sigc::mem_fun (*_rc_config, &RCConfiguration::set_afl_position)
1522 pa->add (AFLFromBeforeProcessors, _("immediately post-fader"));
1523 pa->add (AFLFromAfterProcessors, _("after post-fader processors (before pan)"));
1525 add_option (_("Solo / mute"), pa);
1527 parameter_changed ("use-monitor-bus");
1529 add_option (_("Solo / mute"),
1532 _("Exclusive solo"),
1533 sigc::mem_fun (*_rc_config, &RCConfiguration::get_exclusive_solo),
1534 sigc::mem_fun (*_rc_config, &RCConfiguration::set_exclusive_solo)
1537 add_option (_("Solo / mute"),
1540 _("Show solo muting"),
1541 sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_solo_mutes),
1542 sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_solo_mutes)
1545 add_option (_("Solo / mute"),
1547 "solo-mute-override",
1548 _("Soloing overrides muting"),
1549 sigc::mem_fun (*_rc_config, &RCConfiguration::get_solo_mute_override),
1550 sigc::mem_fun (*_rc_config, &RCConfiguration::set_solo_mute_override)
1553 add_option (_("Solo / mute"), new OptionEditorHeading (_("Default track / bus muting options")));
1555 add_option (_("Solo / mute"),
1557 "mute-affects-pre-fader",
1558 _("Mute affects pre-fader sends"),
1559 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mute_affects_pre_fader),
1560 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mute_affects_pre_fader)
1563 add_option (_("Solo / mute"),
1565 "mute-affects-post-fader",
1566 _("Mute affects post-fader sends"),
1567 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mute_affects_post_fader),
1568 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mute_affects_post_fader)
1571 add_option (_("Solo / mute"),
1573 "mute-affects-control-outs",
1574 _("Mute affects control outputs"),
1575 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mute_affects_control_outs),
1576 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mute_affects_control_outs)
1579 add_option (_("Solo / mute"),
1581 "mute-affects-main-outs",
1582 _("Mute affects main outputs"),
1583 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mute_affects_main_outs),
1584 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mute_affects_main_outs)
1587 add_option (_("MIDI"),
1590 _("Send MIDI Clock"),
1591 sigc::mem_fun (*_rc_config, &RCConfiguration::get_send_midi_clock),
1592 sigc::mem_fun (*_rc_config, &RCConfiguration::set_send_midi_clock)
1595 add_option (_("MIDI"),
1598 _("Send MIDI Time Code"),
1599 sigc::mem_fun (*_rc_config, &RCConfiguration::get_send_mtc),
1600 sigc::mem_fun (*_rc_config, &RCConfiguration::set_send_mtc)
1603 add_option (_("MIDI"),
1604 new SpinOption<int> (
1605 "mtc-qf-speed-tolerance",
1606 _("Percentage either side of normal transport speed to transmit MTC"),
1607 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mtc_qf_speed_tolerance),
1608 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mtc_qf_speed_tolerance),
1612 add_option (_("MIDI"),
1615 _("Obey MIDI Machine Control commands"),
1616 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mmc_control),
1617 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mmc_control)
1620 add_option (_("MIDI"),
1623 _("Send MIDI Machine Control commands"),
1624 sigc::mem_fun (*_rc_config, &RCConfiguration::get_send_mmc),
1625 sigc::mem_fun (*_rc_config, &RCConfiguration::set_send_mmc)
1628 add_option (_("MIDI"),
1631 _("Send MIDI control feedback"),
1632 sigc::mem_fun (*_rc_config, &RCConfiguration::get_midi_feedback),
1633 sigc::mem_fun (*_rc_config, &RCConfiguration::set_midi_feedback)
1636 add_option (_("MIDI"),
1637 new SpinOption<uint8_t> (
1638 "mmc-receive-device-id",
1639 _("Inbound MMC device ID"),
1640 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mmc_receive_device_id),
1641 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mmc_receive_device_id),
1645 add_option (_("MIDI"),
1646 new SpinOption<uint8_t> (
1647 "mmc-send-device-id",
1648 _("Outbound MMC device ID"),
1649 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mmc_send_device_id),
1650 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mmc_send_device_id),
1654 add_option (_("MIDI"),
1655 new SpinOption<int32_t> (
1656 "initial-program-change",
1657 _("Initial program change"),
1658 sigc::mem_fun (*_rc_config, &RCConfiguration::get_initial_program_change),
1659 sigc::mem_fun (*_rc_config, &RCConfiguration::set_initial_program_change),
1663 add_option (_("MIDI"),
1665 "diplay-first-midi-bank-as-zero",
1666 _("Display first MIDI bank/program as 0"),
1667 sigc::mem_fun (*_rc_config, &RCConfiguration::get_first_midi_bank_is_zero),
1668 sigc::mem_fun (*_rc_config, &RCConfiguration::set_first_midi_bank_is_zero)
1671 add_option (_("MIDI"),
1673 "never-display-periodic-midi",
1674 _("Never display periodic MIDI messages (MTC, MIDI Clock)"),
1675 sigc::mem_fun (*_rc_config, &RCConfiguration::get_never_display_periodic_midi),
1676 sigc::mem_fun (*_rc_config, &RCConfiguration::set_never_display_periodic_midi)
1679 add_option (_("MIDI"),
1682 _("Sound MIDI notes as they are selected"),
1683 sigc::mem_fun (*_rc_config, &RCConfiguration::get_sound_midi_notes),
1684 sigc::mem_fun (*_rc_config, &RCConfiguration::set_sound_midi_notes)
1687 /* USER INTERACTION */
1689 add_option (_("User interaction"), new OptionEditorHeading (_("Keyboard")));
1691 add_option (_("User interaction"), new KeyboardOptions);
1693 add_option (_("User interaction"), new OptionEditorHeading (_("Control surfaces")));
1695 add_option (_("User interaction"), new ControlSurfacesOptions (*this));
1697 ComboOption<RemoteModel>* rm = new ComboOption<RemoteModel> (
1699 _("Control surface remote ID"),
1700 sigc::mem_fun (*_rc_config, &RCConfiguration::get_remote_model),
1701 sigc::mem_fun (*_rc_config, &RCConfiguration::set_remote_model)
1704 rm->add (UserOrdered, _("assigned by user"));
1705 rm->add (MixerOrdered, _("follows order of mixer"));
1706 rm->add (EditorOrdered, _("follows order of editor"));
1708 add_option (_("User interaction"), rm);
1712 add_option (S_("GUI"),
1715 _("Graphically indicate mouse pointer hovering over various widgets"),
1716 sigc::mem_fun (*_rc_config, &RCConfiguration::get_widget_prelight),
1717 sigc::mem_fun (*_rc_config, &RCConfiguration::set_widget_prelight)
1720 add_option (S_("GUI"),
1723 _("Show tooltips if mouse hovers over a control"),
1724 sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_tooltips),
1725 sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_tooltips)
1729 /* font scaling does nothing with GDK/Quartz */
1730 add_option (S_("GUI"), new FontScalingOptions (_rc_config));
1732 add_option (S_("GUI"),
1734 "use-own-plugin-gui",
1735 _("Use plugins' own interfaces instead of Ardour's"),
1736 sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_plugin_own_gui),
1737 sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_plugin_own_gui)
1740 /* The names of these controls must be the same as those given in MixerStrip
1741 for the actual widgets being controlled.
1743 _mixer_strip_visibility.add (0, X_("PhaseInvert"), _("Phase Invert"));
1744 _mixer_strip_visibility.add (0, X_("SoloSafe"), _("Solo Safe"));
1745 _mixer_strip_visibility.add (0, X_("SoloIsolated"), _("Solo Isolated"));
1746 _mixer_strip_visibility.add (0, X_("Comments"), _("Comments"));
1747 _mixer_strip_visibility.add (0, X_("MeterPoint"), _("Meter Point"));
1751 new VisibilityOption (
1753 &_mixer_strip_visibility,
1754 sigc::mem_fun (*_rc_config, &RCConfiguration::get_mixer_strip_visibility),
1755 sigc::mem_fun (*_rc_config, &RCConfiguration::set_mixer_strip_visibility)
1759 add_option (S_("GUI"),
1761 "default-narrow_ms",
1762 _("Use narrow strips in the mixer by default"),
1763 sigc::mem_fun (*_rc_config, &RCConfiguration::get_default_narrow_ms),
1764 sigc::mem_fun (*_rc_config, &RCConfiguration::set_default_narrow_ms)
1767 add_option (S_("GUI"), new OptionEditorHeading (_("Metering")));
1769 ComboOption<float>* mht = new ComboOption<float> (
1771 _("Meter hold time"),
1772 sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_hold),
1773 sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_hold)
1776 mht->add (MeterHoldOff, _("off"));
1777 mht->add (MeterHoldShort, _("short"));
1778 mht->add (MeterHoldMedium, _("medium"));
1779 mht->add (MeterHoldLong, _("long"));
1781 add_option (S_("GUI"), mht);
1783 ComboOption<float>* mfo = new ComboOption<float> (
1785 _("Meter fall-off"),
1786 sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_falloff),
1787 sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_falloff)
1790 mfo->add (METER_FALLOFF_OFF, _("off"));
1791 mfo->add (METER_FALLOFF_SLOWEST, _("slowest"));
1792 mfo->add (METER_FALLOFF_SLOW, _("slow"));
1793 mfo->add (METER_FALLOFF_MEDIUM, _("medium"));
1794 mfo->add (METER_FALLOFF_FAST, _("fast"));
1795 mfo->add (METER_FALLOFF_FASTER, _("faster"));
1796 mfo->add (METER_FALLOFF_FASTEST, _("fastest"));
1798 add_option (S_("GUI"), mfo);
1802 RCOptionEditor::parameter_changed (string const & p)
1804 OptionEditor::parameter_changed (p);
1806 if (p == "use-monitor-bus") {
1807 bool const s = Config->get_use_monitor_bus ();
1809 /* we can't use this if we don't have a monitor bus */
1810 Config->set_solo_control_is_listen_control (false);
1812 _solo_control_is_listen_control->set_sensitive (s);
1813 _listen_position->set_sensitive (s);
1814 } else if (p == "sync-source") {
1815 _sync_source->set_sensitive (true);
1817 _sync_source->set_sensitive (_session->config.get_external_sync());
1819 switch(Config->get_sync_source()) {
1822 _sync_genlock->set_sensitive (true);
1823 _sync_framerate->set_sensitive (true);
1824 _sync_source_2997->set_sensitive (true);
1827 _sync_genlock->set_sensitive (false);
1828 _sync_framerate->set_sensitive (false);
1829 _sync_source_2997->set_sensitive (false);
1833 } else if (p == "send-ltc") {
1834 bool const s = Config->get_send_ltc ();
1835 _ltc_send_continuously->set_sensitive (s);
1836 _ltc_volume_slider->set_sensitive (s);
1841 void RCOptionEditor::ltc_generator_volume_changed () {
1842 _rc_config->set_ltc_output_volume (pow(10, _ltc_volume_adjustment->get_value() / 20));
1846 RCOptionEditor::populate_sync_options ()
1848 vector<SyncSource> sync_opts = ARDOUR::get_available_sync_options ();
1850 _sync_source->clear ();
1852 for (vector<SyncSource>::iterator i = sync_opts.begin(); i != sync_opts.end(); ++i) {
1853 _sync_source->add (*i, sync_source_to_string (*i));