$Id: volume_controller.cc,v 1.4 2000/05/03 15:54:21 pbd Exp $
*/
+#include <algorithm>
+
#include <string.h>
#include <limits.h>
+#include "pbd/controllable.h"
+#include "pbd/stacktrace.h"
+
+#include "gtkmm2ext/gui_thread.h"
+
+#include "ardour/dB.h"
+#include "ardour/rc_configuration.h"
+#include "ardour/utils.h"
+
#include "volume_controller.h"
using namespace Gtk;
VolumeController::VolumeController (Glib::RefPtr<Gdk::Pixbuf> p,
- Gtk::Adjustment *adj,
+ boost::shared_ptr<PBD::Controllable> c,
+ double def,
+ double step,
+ double page,
bool with_numeric,
- int subw, int subh)
+ int subw,
+ int subh,
+ bool linear)
- : MotionFeedback (p, MotionFeedback::Rotary, "", adj, with_numeric, subw, subh)
- , adjustment (adj)
-{
+ : MotionFeedback (p, MotionFeedback::Rotary, c, def, step, page, "", with_numeric, subw, subh)
+ , _linear (linear)
+{
+ set_print_func (VolumeController::_dB_printer, this);
+ value->set_width_chars (8);
+}
- adjustment = get_adjustment(); // in case null was passed in
- adjustment->signal_value_changed().connect(mem_fun (*this,&VolumeController::adjustment_value_changed));
+void
+VolumeController::_dB_printer (char buf[32], const boost::shared_ptr<PBD::Controllable>& c, void* arg)
+{
+ VolumeController* vc = reinterpret_cast<VolumeController*>(arg);
+ vc->dB_printer (buf, c);
}
void
-VolumeController::adjustment_value_changed ()
+VolumeController::dB_printer (char buf[32], const boost::shared_ptr<PBD::Controllable>& c)
{
-
+ if (c) {
+
+ if (_linear) {
+
+ double val = accurate_coefficient_to_dB (c->get_value());
+
+ if (step_inc < 1.0) {
+ if (val >= 0.0) {
+ snprintf (buf, 32, "+%5.2f dB", val);
+ } else {
+ snprintf (buf, 32, "%5.2f dB", val);
+ }
+ } else {
+ if (val >= 0.0) {
+ snprintf (buf, 32, "+%2ld dB", lrint (val));
+ } else {
+ snprintf (buf, 32, "%2ld dB", lrint (val));
+ }
+ }
+
+ } else {
+
+ double dB = accurate_coefficient_to_dB (c->get_value());
+
+ if (step_inc < 1.0) {
+ if (dB >= 0.0) {
+ snprintf (buf, 32, "+%5.2f dB", dB);
+ } else {
+ snprintf (buf, 32, "%5.2f dB", dB);
+ }
+ } else {
+ if (dB >= 0.0) {
+ snprintf (buf, 32, "+%2ld dB", lrint (dB));
+ } else {
+ snprintf (buf, 32, "%2ld dB", lrint (dB));
+ }
+ }
+ }
+ } else {
+ snprintf (buf, 32, "--");
+ }
}
+double
+VolumeController::to_control_value (double display_value)
+{
+ double v;
+
+ /* display value is always clamped to 0.0 .. 1.0 */
+ display_value = std::max (0.0, std::min (1.0, display_value));
+ if (_linear) {
+ v = _controllable->lower() + ((_controllable->upper() - _controllable->lower()) * display_value);
+ } else {
+ v = ARDOUR::slider_position_to_gain_with_max (display_value, ARDOUR::Config->get_max_gain());
+ }
+
+ return v;
+}
+
+double
+VolumeController::to_display_value (double control_value)
+{
+ double v;
+
+ if (_linear) {
+ v = (control_value - _controllable->lower ()) / (_controllable->upper() - _controllable->lower());
+ } else {
+ v = ARDOUR::gain_to_slider_position_with_max (control_value, _controllable->upper());
+ }
+
+ return v;
+}
+
+double
+VolumeController::adjust (double control_delta)
+{
+ double v;
+
+ if (!_linear) {
+ /* we map back into the linear/fractional slider position,
+ * because this kind of control goes all the way down
+ * to -inf dB, and we want this occur in a reasonable way in
+ * terms of user interaction. if we leave the adjustment in the
+ * gain coefficient domain (or dB domain), the lower end of the
+ * control range (getting close to -inf dB) takes forever.
+ */
+#if 0
+ /* convert to linear/fractional slider position domain */
+ v = ARDOUR::gain_to_slider_position_with_max (_controllable->get_value (), _controllable->upper());
+ /* increment in this domain */
+ v += control_delta;
+ /* clamp to appropriate range for linear/fractional slider domain */
+ v = std::max (0.0, std::min (1.0, v));
+ /* convert back to gain coefficient domain */
+ v = ARDOUR::slider_position_to_gain_with_max (v, _controllable->upper());
+ /* clamp in controller domain */
+ v = std::max (_controllable->lower(), std::min (_controllable->upper(), v));
+ /* convert to dB domain */
+ v = accurate_coefficient_to_dB (v);
+ /* round up/down to nearest 0.1dB */
+ if (control_delta > 0.0) {
+ v = ceil (v * 10.0) / 10.0;
+ } else {
+ v = floor (v * 10.0) / 10.0;
+ }
+ /* and return it */
+ return dB_to_coefficient (v);
+#else
+ /* ^^ Above algorithm is not symmetric. Scroll up to steps, scoll down two steps, -> different gain.
+ *
+ * see ./libs/gtkmm2ext/gtkmm2ext/motionfeedback.h and gtk2_ardour/monitor_section.cc:
+ * min-delta (corr) = MIN(0.01 * page inc, 1 * size_inc) // (gain_control uses size_inc=0.01, page_inc=0.1)
+ * range corr: 0..2 -> -inf..+6dB
+ * step sizes [0.01, 0.10, 0.20] * page_inc, [1,2,10,100] * step_inc. [1,2,10,100] * page_inc
+ *
+ * 0.001, 0.01, 0.02, 0.1, .2, 1, 10
+ * -> 1k steps between -inf..0dB
+ * -> 1k steps between 0..+dB
+ *
+ * IOW:
+ * the range is from *0 (-inf dB) to *2.0 ( +6dB)
+ * the knob is configured to to go in steps of 0.001 - that's 2000 steps between 0 and 2.
+ * or 1000 steps between 0 and 1.
+ *
+ * we cannot round to .01dB steps because
+ * There are only 600 possible values between +0db and +6dB when going in steps of .01dB
+ * 1000/600 = 1.66666...
+ *
+ ******
+ * idea: make the 'controllable use a fixed range of dB.
+ * do a 1:1 mapping between values. :et's stick with the range of 0..2 in 0.001 steps
+ *
+ * "-80" becomes 0 and "+6" becomes 2000. (NB +6dB is actually 1995, but we clamp that to the top)
+ *
+ * This approach is better (more consistet) but not good. At least the dial does not annoy me as much
+ * anymore as it did before.
+ *
+ * const double stretchfactor = rint((_controllable->upper() - _controllable->lower()) / 0.001); // 2000;
+ * const double logfactor = stretchfactor / ((20.0 * log10( _controllable->upper())) + 80.0); // = 23.250244732
+ */
+ v = _controllable->get_value ();
+ /* assume everything below -60dB is silent (.001 ^= -60dB)
+ * but map range -80db..+6dB to a scale of 0..2000
+ * 80db was motivated because 2000/((20.0 * log(1)) + 80.0) is an integer value. "0dB" is included on the scale.
+ * but this leaves a dead area at the bottom of the meter..
+ */
+ double arange = (v >= 0.001) ? ( ((20.0 * log10(v)) + 80.0) * 23.250244732 ) : ( 0 );
+ /* add the delta */
+ v = rint(arange) + rint(control_delta * 1000.0); // (min steps is 1.0/0.001 == 1000.0)
+ /* catch bottom -80..-60 db in one step */
+ if (v < 466) v = (control_delta > 0) ? 0.001 : 0;
+ /* reverse operation (pow(10, .05 * ((v / 23.250244732) - 80.0)))
+ * can be simplified to :*/
+ else v = pow(10, (v * 0.00215051499) - 4.0);
+ /* clamp value in coefficient domain */
+ v = std::max (_controllable->lower(), std::min (_controllable->upper(), v));
+ return v;
+#endif
+ } else {
+ double mult;
+
+ if (control_delta < 0.0) {
+ mult = -1.0;
+ } else {
+ mult = 1.0;
+ }
+
+ if (fabs (control_delta) < 0.05) {
+ control_delta = mult * 0.05;
+ } else {
+ control_delta = mult * 0.1;
+ }
+
+ v = _controllable->get_value();
+
+ if (v == 0.0) {
+ /* if we don't special case this, we can't escape from
+ the -infinity dB black hole.
+ */
+ if (control_delta > 0.0) {
+ v = dB_to_coefficient (-100 + control_delta);
+ }
+ } else {
+ static const double dB_minus_200 = dB_to_coefficient (-200.0);
+ static const double dB_minus_100 = dB_to_coefficient (-100.0);
+ static const double dB_minus_50 = dB_to_coefficient (-50.0);
+ static const double dB_minus_20 = dB_to_coefficient (-20.0);
+
+ if (control_delta < 0 && v < dB_minus_200) {
+ v = 0.0;
+ } else {
+
+ /* non-linear scaling as the dB level gets low
+ so that we can hit -inf and get back out of
+ it appropriately.
+ */
+
+ if (v < dB_minus_100) {
+ control_delta *= 1000.0;
+ } else if (v < dB_minus_50) {
+ control_delta *= 100.0;
+ } else if (v < dB_minus_20) {
+ control_delta *= 10.0;
+ }
+
+ v = accurate_coefficient_to_dB (v);
+ v += control_delta;
+ v = dB_to_coefficient (v);
+ }
+ }
+
+ return std::max (_controllable->lower(), std::min (_controllable->upper(), v));
+ }
+
+}