#define J2K_CP_CSTY_SOP 0x02
#define J2K_CP_CSTY_EPH 0x04
#define J2K_CCP_CSTY_PRT 0x01
-#define J2K_CCP_CBLKSTY_LAZY 0x01
-#define J2K_CCP_CBLKSTY_RESET 0x02
-#define J2K_CCP_CBLKSTY_TERMALL 0x04
-#define J2K_CCP_CBLKSTY_VSC 0x08
-#define J2K_CCP_CBLKSTY_PTERM 0x10
-#define J2K_CCP_CBLKSTY_SEGSYM 0x20
+#define J2K_CCP_CBLKSTY_LAZY 0x01 /**< Selective arithmetic coding bypass */
+#define J2K_CCP_CBLKSTY_RESET 0x02 /**< Reset context probabilities on coding pass boundaries */
+#define J2K_CCP_CBLKSTY_TERMALL 0x04 /**< Termination on each coding pass */
+#define J2K_CCP_CBLKSTY_VSC 0x08 /**< Vertically stripe causal context */
+#define J2K_CCP_CBLKSTY_PTERM 0x10 /**< Predictable termination */
+#define J2K_CCP_CBLKSTY_SEGSYM 0x20 /**< Segmentation symbols are used */
#define J2K_CCP_QNTSTY_NOQNT 0
#define J2K_CCP_QNTSTY_SIQNT 1
#define J2K_CCP_QNTSTY_SEQNT 2
#define J2K_MS_EPH 0xff92 /**< EPH marker value */
#define J2K_MS_CRG 0xff63 /**< CRG marker value */
#define J2K_MS_COM 0xff64 /**< COM marker value */
+
+#define J2K_MS_UNK 0 /**< UNKNOWN marker value */
+
+#ifdef TODO_MS
+#define J2K_MS_CBD 0xff78 /**< CBD marker value */
+#define J2K_MS_MCC 0xff75 /**< MCC marker value */
+#define J2K_MS_MCT 0xff74 /**< MCT marker value */
+#define J2K_MS_MCO 0xff77 /**< MCO marker value */
+#endif
+
/* UniPG>> */
#ifdef USE_JPWL
#define J2K_MS_EPC 0xff68 /**< EPC marker value (Part 11: JPEG 2000 for Wireless) */
/* <<UniPG */
+struct opj_stream_private;
+
/* ----------------------------------------------------------------------- */
/**
J2K_STATE_TPHSOT = 0x0008, /**< the decoding process is in a tile part header and expects a SOT marker */
J2K_STATE_TPH = 0x0010, /**< the decoding process is in a tile part header */
J2K_STATE_MT = 0x0020, /**< the EOC marker has just been read */
- J2K_STATE_NEOC = 0x0040 /**< the decoding process must not expect a EOC marker because the codestream is truncated */
+ J2K_STATE_NEOC = 0x0040, /**< the decoding process must not expect a EOC marker because the codestream is truncated */
+ J2K_STATE_ERR = 0x0080 /**< the decoding process has encountered an error */
} J2K_STATUS;
/* ----------------------------------------------------------------------- */
int mant;
} opj_stepsize_t;
+//OPJ_V1/**
+//Tile-component coding parameters
+//*/
+//typedef struct opj_tccp {
+// /** coding style */
+// int csty;
+// /** number of resolutions */
+// int numresolutions;
+// /** code-blocks width */
+// int cblkw;
+// /** code-blocks height */
+// int cblkh;
+// /** code-block coding style */
+// int cblksty;
+// /** discrete wavelet transform identifier */
+// int qmfbid;
+// /** quantisation style */
+// int qntsty;
+// /** stepsizes used for quantization */
+// opj_stepsize_t stepsizes[J2K_MAXBANDS];
+// /** number of guard bits */
+// int numgbits;
+// /** Region Of Interest shift */
+// int roishift;
+// /** precinct width */
+// int prcw[J2K_MAXRLVLS];
+// /** precinct height */
+// int prch[J2K_MAXRLVLS];
+//} opj_tccp_t;
+
/**
Tile-component coding parameters
*/
-typedef struct opj_tccp {
+typedef struct opj_tccp
+{
/** coding style */
- int csty;
+ OPJ_UINT32 csty;
/** number of resolutions */
- int numresolutions;
+ OPJ_UINT32 numresolutions;
/** code-blocks width */
- int cblkw;
+ OPJ_UINT32 cblkw;
/** code-blocks height */
- int cblkh;
+ OPJ_UINT32 cblkh;
/** code-block coding style */
- int cblksty;
+ OPJ_UINT32 cblksty;
/** discrete wavelet transform identifier */
- int qmfbid;
+ OPJ_UINT32 qmfbid;
/** quantisation style */
- int qntsty;
+ OPJ_UINT32 qntsty;
/** stepsizes used for quantization */
opj_stepsize_t stepsizes[J2K_MAXBANDS];
/** number of guard bits */
- int numgbits;
+ OPJ_UINT32 numgbits;
/** Region Of Interest shift */
- int roishift;
+ OPJ_INT32 roishift;
/** precinct width */
- int prcw[J2K_MAXRLVLS];
+ OPJ_UINT32 prcw[J2K_MAXRLVLS];
/** precinct height */
- int prch[J2K_MAXRLVLS];
-} opj_tccp_t;
+ OPJ_UINT32 prch[J2K_MAXRLVLS];
+ /** the dc_level_shift **/
+ OPJ_INT32 m_dc_level_shift;
+}
+opj_tccp_t;
+
/**
Tile coding parameters :
opj_tccp_t *tccps;
} opj_tcp_t;
+
+/**
+ * Type of data for storing the MCT data
+ */
+typedef enum MCT_ELEMENT_TYPE
+{
+ MCT_TYPE_INT16 = 0, /** MCT data is stored as signed shorts*/
+ MCT_TYPE_INT32 = 1, /** MCT data is stored as signed integers*/
+ MCT_TYPE_FLOAT = 2, /** MCT data is stored as floats*/
+ MCT_TYPE_DOUBLE = 3 /** MCT data is stored as doubles*/
+} J2K_MCT_ELEMENT_TYPE;
+
+/**
+ * Type of data for storing the MCT data
+ */
+typedef enum MCT_ARRAY_TYPE
+{
+ MCT_TYPE_DEPENDENCY = 0,
+ MCT_TYPE_DECORRELATION = 1,
+ MCT_TYPE_OFFSET = 2
+} J2K_MCT_ARRAY_TYPE;
+
+typedef struct opj_mct_data
+{
+ J2K_MCT_ELEMENT_TYPE m_element_type;
+ J2K_MCT_ARRAY_TYPE m_array_type;
+ OPJ_UINT32 m_index;
+ OPJ_BYTE * m_data;
+ OPJ_UINT32 m_data_size;
+}
+opj_mct_data_t;
+
+typedef struct opj_simple_mcc_decorrelation_data
+{
+ OPJ_UINT32 m_index;
+ OPJ_UINT32 m_nb_comps;
+ opj_mct_data_t * m_decorrelation_array;
+ opj_mct_data_t * m_offset_array;
+ OPJ_UINT32 m_is_irreversible : 1;
+}
+opj_simple_mcc_decorrelation_data_t;
+
+/**
+Tile coding parameters :
+this structure is used to store coding/decoding parameters common to all
+tiles (information like COD, COC in main header)
+*/
+typedef struct opj_tcp_v2
+{
+ /** coding style */
+ OPJ_UINT32 csty;
+ /** progression order */
+ OPJ_PROG_ORDER prg;
+ /** number of layers */
+ OPJ_UINT32 numlayers;
+ OPJ_UINT32 num_layers_to_decode;
+ /** multi-component transform identifier */
+ OPJ_UINT32 mct;
+ /** rates of layers */
+ OPJ_FLOAT32 rates[100];
+ /** number of progression order changes */
+ OPJ_UINT32 numpocs;
+ /** progression order changes */
+ opj_poc_t pocs[32];
+ /** packet header store there for futur use in t2_decode_packet */
+ OPJ_BYTE *ppt_data;
+ /** used to keep a track of the allocated memory */
+ OPJ_BYTE *ppt_buffer;
+ /** Number of bytes stored inside ppt_data*/
+ OPJ_UINT32 ppt_data_size;
+ /** size of ppt_data*/
+ OPJ_UINT32 ppt_len;
+ /** add fixed_quality */
+ OPJ_FLOAT32 distoratio[100];
+ /** tile-component coding parameters */
+ opj_tccp_t *tccps;
+ /** number of tile parts for the tile. */
+ OPJ_UINT32 m_nb_tile_parts;
+ /** data for the tile */
+ OPJ_BYTE * m_data;
+ /** size of data */
+ OPJ_UINT32 m_data_size;
+ /** encoding norms */
+ OPJ_FLOAT64 * mct_norms;
+ /** the mct decoding matrix */
+ OPJ_FLOAT32 * m_mct_decoding_matrix;
+ /** the mct coding matrix */
+ OPJ_FLOAT32 * m_mct_coding_matrix;
+ /** mct records */
+ opj_mct_data_t * m_mct_records;
+ /** the number of mct records. */
+ OPJ_UINT32 m_nb_mct_records;
+ /** the max number of mct records. */
+ OPJ_UINT32 m_nb_max_mct_records;
+ /** mcc records */
+ opj_simple_mcc_decorrelation_data_t * m_mcc_records;
+ /** the number of mct records. */
+ OPJ_UINT32 m_nb_mcc_records;
+ /** the max number of mct records. */
+ OPJ_UINT32 m_nb_max_mcc_records;
+
+
+
+ /***** FLAGS *******/
+ /** If ppt == 1 --> there was a PPT marker for the present tile */
+ OPJ_UINT32 ppt : 1;
+ /** indicates if a POC marker has been used O:NO, 1:YES */
+ OPJ_UINT32 POC : 1;
+} opj_tcp_v2_t;
+
+
+
+
+
/**
Coding parameters
*/
int layer;
/** if == NO_LIMITATION, decode entire codestream; if == LIMIT_TO_MAIN_HEADER then only decode the main header */
OPJ_LIMIT_DECODING limit_decoding;
- /** 0 = no index || 1 = index */
- int index_on;
/** XTOsiz */
int tx0;
/** YTOsiz */
opj_tcp_t *tcps;
/** fixed layer */
int *matrice;
+/* UniPG>> */
+#ifdef USE_JPWL
+ /** enables writing of EPC in MH, thus activating JPWL */
+ opj_bool epc_on;
+ /** enables writing of EPB, in case of activated JPWL */
+ opj_bool epb_on;
+ /** enables writing of ESD, in case of activated JPWL */
+ opj_bool esd_on;
+ /** enables writing of informative techniques of ESD, in case of activated JPWL */
+ opj_bool info_on;
+ /** enables writing of RED, in case of activated JPWL */
+ opj_bool red_on;
+ /** error protection method for MH (0,1,16,32,37-128) */
+ int hprot_MH;
+ /** tile number of header protection specification (>=0) */
+ int hprot_TPH_tileno[JPWL_MAX_NO_TILESPECS];
+ /** error protection methods for TPHs (0,1,16,32,37-128) */
+ int hprot_TPH[JPWL_MAX_NO_TILESPECS];
+ /** tile number of packet protection specification (>=0) */
+ int pprot_tileno[JPWL_MAX_NO_PACKSPECS];
+ /** packet number of packet protection specification (>=0) */
+ int pprot_packno[JPWL_MAX_NO_PACKSPECS];
+ /** error protection methods for packets (0,1,16,32,37-128) */
+ int pprot[JPWL_MAX_NO_PACKSPECS];
+ /** enables writing of ESD, (0/2/4 bytes) */
+ int sens_size;
+ /** sensitivity addressing size (0=auto/2/4 bytes) */
+ int sens_addr;
+ /** sensitivity range (0-3) */
+ int sens_range;
+ /** sensitivity method for MH (-1,0-7) */
+ int sens_MH;
+ /** tile number of sensitivity specification (>=0) */
+ int sens_TPH_tileno[JPWL_MAX_NO_TILESPECS];
+ /** sensitivity methods for TPHs (-1,0-7) */
+ int sens_TPH[JPWL_MAX_NO_TILESPECS];
+ /** enables JPWL correction at the decoder */
+ opj_bool correct;
+ /** expected number of components at the decoder */
+ int exp_comps;
+ /** maximum number of tiles at the decoder */
+ int max_tiles;
+#endif /* USE_JPWL */
+/* <<UniPG */
+} opj_cp_t;
+
+typedef struct opj_encoding_param
+{
+ /** Digital cinema profile*/
+ OPJ_CINEMA_MODE m_cinema;
+ /** Maximum rate for each component. If == 0, component size limitation is not considered */
+ OPJ_UINT32 m_max_comp_size;
+ /** Position of tile part flag in progression order*/
+ OPJ_INT32 m_tp_pos;
+ /** fixed layer */
+ OPJ_INT32 *m_matrice;
+ /** Flag determining tile part generation*/
+ OPJ_BYTE m_tp_flag;
+ /** allocation by rate/distortion */
+ OPJ_UINT32 m_disto_alloc : 1;
+ /** allocation by fixed layer */
+ OPJ_UINT32 m_fixed_alloc : 1;
+ /** add fixed_quality */
+ OPJ_UINT32 m_fixed_quality : 1;
+ /** Enabling Tile part generation*/
+ OPJ_UINT32 m_tp_on : 1;
+}
+opj_encoding_param_t;
+
+typedef struct opj_decoding_param
+{
+ /** if != 0, then original dimension divided by 2^(reduce); if == 0 or not used, image is decoded to the full resolution */
+ OPJ_UINT32 m_reduce;
+ /** if != 0, then only the first "layer" layers are decoded; if == 0 or not used, all the quality layers are decoded */
+ OPJ_UINT32 m_layer;
+}
+opj_decoding_param_t;
+
+
+/**
+Coding parameters
+*/
+typedef struct opj_cp_v2
+{
+ /** Size of the image in bits*/
+ /*int img_size;*/
+ /** Rsiz*/
+ OPJ_RSIZ_CAPABILITIES rsiz;
+ /** XTOsiz */
+ OPJ_UINT32 tx0; // MSD see norm
+ /** YTOsiz */
+ OPJ_UINT32 ty0; // MSD see norm
+ /** XTsiz */
+ OPJ_UINT32 tdx;
+ /** YTsiz */
+ OPJ_UINT32 tdy;
+ /** comment */
+ OPJ_CHAR *comment;
+ /** number of tiles in width */
+ OPJ_UINT32 tw;
+ /** number of tiles in heigth */
+ OPJ_UINT32 th;
+
+
+
+
+ /** packet header store there for futur use in t2_decode_packet */
+ OPJ_BYTE *ppm_data;
+ /** size of the ppm_data*/
+ OPJ_UINT32 ppm_len;
+ /** size of the ppm_data*/
+ OPJ_UINT32 ppm_data_read;
+
+ OPJ_BYTE *ppm_data_current;
+
+ /** packet header storage original buffer */
+ OPJ_BYTE *ppm_buffer;
+ /** pointer remaining on the first byte of the first header if ppm is used */
+ OPJ_BYTE *ppm_data_first;
+ /** Number of bytes actually stored inside the ppm_data */
+ OPJ_UINT32 ppm_data_size;
+ /** use in case of multiple marker PPM (number of info already store) */
+ OPJ_INT32 ppm_store;
+ /** use in case of multiple marker PPM (case on non-finished previous info) */
+ OPJ_INT32 ppm_previous;
+
+ /** tile coding parameters */
+ opj_tcp_v2_t *tcps;
+ union
+ {
+ opj_decoding_param_t m_dec;
+ opj_encoding_param_t m_enc;
+ }
+ m_specific_param;
+
+
/* UniPG>> */
#ifdef USE_JPWL
/** enables writing of EPC in MH, thus activating JPWL */
/** maximum number of tiles at the decoder */
int max_tiles;
#endif /* USE_JPWL */
+
+ /******** FLAGS *********/
+ /** if ppm == 1 --> there was a PPM marker*/
+ OPJ_UINT32 ppm : 1;
+ /** tells if the parameter is a coding or decoding one */
+ OPJ_UINT32 m_is_decoder : 1;
/* <<UniPG */
-} opj_cp_t;
+} opj_cp_v2_t;
+
+
+typedef struct opj_j2k_dec
+{
+ /** locate in which part of the codestream the decoder is (main header, tile header, end) */
+ OPJ_UINT32 m_state;
+ /**
+ * store decoding parameters common to all tiles (information like COD, COC in main header)
+ */
+ opj_tcp_v2_t *m_default_tcp;
+ OPJ_BYTE *m_header_data;
+ OPJ_UINT32 m_header_data_size;
+ /** to tell the tile part length */
+ OPJ_UINT32 m_sot_length;
+ /** Only tiles index in the correct range will be decoded.*/
+ OPJ_UINT32 m_start_tile_x;
+ OPJ_UINT32 m_start_tile_y;
+ OPJ_UINT32 m_end_tile_x;
+ OPJ_UINT32 m_end_tile_y;
+ /** to tell that a tile can be decoded. */
+ OPJ_UINT32 m_can_decode : 1;
+ OPJ_UINT32 m_discard_tiles : 1;
+ OPJ_UINT32 m_skip_data : 1;
+
+} opj_j2k_dec_t;
+
+typedef struct opj_j2k_enc
+{
+ /** Tile part number, regardless of poc, for each new poc, tp is reset to 1*/
+ OPJ_UINT32 m_current_poc_tile_part_number; // tp_num
+
+ /** Tile part number currently coding, taking into account POC. m_current_tile_part_number holds the total number of tile parts while encoding the last tile part.*/
+ OPJ_UINT32 m_current_tile_part_number; //cur_tp_num
+
+ /**
+ locate the start position of the TLM marker
+ after encoding the tilepart, a jump (in j2k_write_sod) is done to the TLM marker to store the value of its length.
+ */
+ OPJ_SIZE_T m_tlm_start;
+ /**
+ * Stores the sizes of the tlm.
+ */
+ OPJ_BYTE * m_tlm_sot_offsets_buffer;
+ /**
+ * The current offset of the tlm buffer.
+ */
+ OPJ_BYTE * m_tlm_sot_offsets_current;
+
+ /** Total num of tile parts in whole image = num tiles* num tileparts in each tile*/
+ /** used in TLMmarker*/
+ OPJ_UINT32 m_total_tile_parts; // totnum_tp
+
+ /* encoded data for a tile */
+ OPJ_BYTE * m_encoded_tile_data;
+
+ /* size of the encoded_data */
+ OPJ_UINT32 m_encoded_tile_size;
+
+ /* encoded data for a tile */
+ OPJ_BYTE * m_header_tile_data;
+
+ /* size of the encoded_data */
+ OPJ_UINT32 m_header_tile_data_size;
+
+
+} opj_j2k_enc_t;
/**
JPEG-2000 codestream reader/writer
opj_cio_t *cio;
} opj_j2k_t;
+struct opj_tcd_v2;
+/**
+JPEG-2000 codestream reader/writer
+*/
+typedef struct opj_j2k_v2
+{
+ union
+ {
+ opj_j2k_dec_t m_decoder;
+ opj_j2k_enc_t m_encoder;
+ }
+ m_specific_param;
+
+ /** number of the tile curently concern by coding/decoding */
+ OPJ_UINT32 m_current_tile_number;
+
+ /** pointer to the encoded / decoded image */
+ //opj_image_t *m_image;
+ opj_image_header_t* m_image_header;
+
+ /** Coding parameters */
+ opj_cp_v2_t m_cp;
+
+ /** the list of procedures to exec **/
+ struct opj_procedure_list * m_procedure_list;
+
+ /** the list of validation procedures to follow to make sure the code is valid **/
+ struct opj_procedure_list * m_validation_list;
+
+ /** helper used to write the index file */
+ opj_codestream_info_v2_t *cstr_info;
+
+ /** the current tile coder/decoder **/
+ struct opj_tcd_v2 * m_tcd;
+ //opj_tcd_v2_t * m_tcd;
+
+ OPJ_UINT32 m_is_decoder : 1;
+
+}
+opj_j2k_v2_t;
+
+
+
+
/** @name Exported functions */
/*@{*/
/* ----------------------------------------------------------------------- */
@param parameters decompression parameters
*/
void j2k_setup_decoder(opj_j2k_t *j2k, opj_dparameters_t *parameters);
+
+void j2k_setup_decoder_v2(opj_j2k_v2_t *j2k, opj_dparameters_t *parameters);
+
/**
Decode an image from a JPEG-2000 codestream
@param j2k J2K decompressor handle
@param cio Input buffer stream
+@param cstr_info Codestream information structure if required, NULL otherwise
@return Returns a decoded image if successful, returns NULL otherwise
*/
-opj_image_t* j2k_decode(opj_j2k_t *j2k, opj_cio_t *cio);
+opj_image_t* j2k_decode(opj_j2k_t *j2k, opj_cio_t *cio, opj_codestream_info_t *cstr_info);
/**
Decode an image form a JPT-stream (JPEG 2000, JPIP)
@param j2k J2K decompressor handle
@param cio Input buffer stream
+@param cstr_info Codestream information structure if required, NULL otherwise
@return Returns a decoded image if successful, returns NULL otherwise
*/
-opj_image_t* j2k_decode_jpt_stream(opj_j2k_t *j2k, opj_cio_t *cio);
+opj_image_t* j2k_decode_jpt_stream(opj_j2k_t *j2k, opj_cio_t *cio, opj_codestream_info_t *cstr_info);
/**
Creates a J2K compression structure
@param cinfo Codec context info
@return Returns a handle to a J2K compressor if successful, returns NULL otherwise
*/
opj_j2k_t* j2k_create_compress(opj_common_ptr cinfo);
+
+/**
+Creates a J2K compression structure
+@param cinfo Codec context info
+@return Returns a handle to a J2K compressor if successful, returns NULL otherwise
+*/
+opj_j2k_v2_t* j2k_create_compress_v2();
+
/**
Destroy a J2K compressor handle
@param j2k J2K compressor handle to destroy
@param cstr_info Codestream information structure if required, NULL otherwise
@return Returns true if successful, returns false otherwise
*/
-bool j2k_encode(opj_j2k_t *j2k, opj_cio_t *cio, opj_image_t *image, opj_codestream_info_t *cstr_info);
+opj_bool j2k_encode(opj_j2k_t *j2k, opj_cio_t *cio, opj_image_t *image, opj_codestream_info_t *cstr_info);
/* ----------------------------------------------------------------------- */
/*@}*/
/*@}*/
+/**
+ * Ends the decompression procedures and possibiliy add data to be read after the
+ * codestream.
+ */
+opj_bool j2k_end_decompress(opj_j2k_v2_t *j2k, struct opj_stream_private *cio, struct opj_event_mgr * p_manager);
+
+/**
+ * Reads a jpeg2000 codestream header structure.
+ *
+ * @param cio the stream to read data from.
+ * @param p_j2k the jpeg2000 codec.
+ * @param p_manager the user event manager.
+ *
+ * @return true if the box is valid.
+ */
+opj_bool j2k_read_header( struct opj_stream_private *p_stream,
+ opj_j2k_v2_t* p_j2k,
+ opj_file_info_t * p_file_info,
+ struct opj_event_mgr* p_manager );
+
+
+/**
+ * Destroys a jpeg2000 codec.
+ *
+ * @param p_j2k the jpeg20000 structure to destroy.
+ */
+void j2k_destroy (opj_j2k_v2_t *p_j2k);
+
+/**
+ * Decode tile data.
+ * @param p_j2k the jpeg2000 codec.
+ * @param p_stream the stream to write data to.
+ * @param p_manager the user event manager.
+ */
+opj_bool j2k_decode_tile (
+ opj_j2k_v2_t * p_j2k,
+ OPJ_UINT32 p_tile_index,
+ OPJ_BYTE * p_data,
+ OPJ_UINT32 p_data_size,
+ struct opj_stream_private *p_stream,
+ struct opj_event_mgr * p_manager
+ );
+
+/**
+ * Reads a tile header.
+ * @param p_j2k the jpeg2000 codec.
+ * @param p_stream the stream to write data to.
+ * @param p_manager the user event manager.
+ */
+opj_bool j2k_read_tile_header (
+ opj_j2k_v2_t * p_j2k,
+ OPJ_UINT32 * p_tile_index,
+ OPJ_UINT32 * p_data_size,
+ OPJ_INT32 * p_tile_x0,
+ OPJ_INT32 * p_tile_y0,
+ OPJ_INT32 * p_tile_x1,
+ OPJ_INT32 * p_tile_y1,
+ OPJ_UINT32 * p_nb_comps,
+ opj_bool * p_go_on,
+ struct opj_stream_private *p_stream,
+ struct opj_event_mgr * p_manager
+ );
+
+
+/**
+ * Sets the given area to be decoded. This function should be called right after opj_read_header and before any tile header reading.
+ *
+ * @param p_j2k the jpeg2000 codec.
+ * @param p_start_x the left position of the rectangle to decode (in image coordinates).
+ * @param p_end_x the right position of the rectangle to decode (in image coordinates).
+ * @param p_start_y the up position of the rectangle to decode (in image coordinates).
+ * @param p_end_y the bottom position of the rectangle to decode (in image coordinates).
+ * @param p_manager the user event manager
+ *
+ * @return true if the area could be set.
+ */
+opj_bool j2k_set_decode_area(
+ opj_j2k_v2_t *p_j2k,
+ OPJ_INT32 p_start_x,
+ OPJ_INT32 p_start_y,
+ OPJ_INT32 p_end_x,
+ OPJ_INT32 p_end_y,
+ struct opj_event_mgr * p_manager
+ );
+
+/**
+ * Creates a J2K decompression structure.
+ *
+ * @return a handle to a J2K decompressor if successful, NULL otherwise.
+*/
+opj_j2k_v2_t* j2k_create_decompress_v2();
+
+
#endif /* __J2K_H */