+The <guilabel>Use best</guilabel> button sets the DCP video frame rate
+to what DCP-o-matic thinks is the best given the content that you have
+added.
+</para>
+
+<para>
+The <guilabel>3D</guilabel> button will set your DCP to 3D mode if it
+is checked. A 3D DCP will then be created, and any 2D content will be
+made 3D compatible by repeating the same frame for both left and right
+eyes. A 3D DCP can be played back on many 3D systems (e.g. Dolby 3D,
+Real-D etc.) but not on a 2D system.
+</para>
+
+<para>
+The <guilabel>Resolution</guilabel> tab allows you to choose the
+resolution for your DCP. Use 2K unless you have content that is of
+high enough resolution to be worth presenting in 4K.
+</para>
+
+<para>
+The <guilabel>JPEG2000 bandwidth</guilabel>; setting changes how big
+the final image files used within the DCP will be. Larger numbers
+will give better quality, but correspondingly larger DCPs. The
+bandwidth can be between 50 and 250 megabits per second (Mbit/s).
+Most commercial DCPs use bit rates between 75 and 125 MBit/s.
+</para>
+
+<para>
+The <guilabel>Audio Channels</guilabel> control sets the number of
+audio channels that the DCP will have. If the DCP has any channels
+for which there is no content audio they will be replaced by silence.
+You can only set an even number of channels here, since that is
+required by the DCI standard. If you want an odd number of channels,
+set the DCP channel count to one greater than you need and the
+unused channel will be filled with silence.
+</para>
+
+<para>
+The <guilabel>Processor</guilabel> control allows you to select a
+process to apply to the audio before it goes into the DCP. Three processes are currently provided:
+</para>
+
+<itemizedlist>
+<listitem>Mid-side decode — this will take a L/R
+stereo input and extract the common part (corresponding to the
+‘Mid’ in a mid-side signal) into the DCP's centre channel.
+The remaining L/R parts will be kept in the L/R channels of the DCP.
+This may be useful to make near-field L/R mixes more compatible with
+cinema audio systems.</listitem>
+<listitem>Stereo to 5.1 up-mixer A — this will take a stereo input and up-mix it to ‘fake’ 5.1. The input L/R are treated as follows:
+<itemizedlist>
+<listitem>DCP L is input L bandpass-filtered between 1.9kHz and 4.8kHz.</listitem>
+<listitem>DCP R is input R bandpass-filtered between 1.9kHz and 4.8kHz.</listitem>
+<listitem>DCP C is input L mixed with input R, taken down by 3dB and then bandpass-filtered between 150Hz and 1.9kHz.</listitem>
+<listitem>DCP Lfe is input L mixed with input R, taken down by 3dB and then bandpass-filtered between 20Hz and 150Hz.</listitem>
+<listitem>DCP Ls is input L bandpass-filtered between 4.8kHz and 20kHz.</listitem>
+<listitem>DCP Rs is input R bandpass-filtered between 4.8kHz and 20kHz.</listitem>
+</itemizedlist>
+<para>
+This upmixing algorithm is due to Gérald Maruccia.
+</para>
+</listitem>
+<listitem>Stereo to 5.1 up-mixer B — this uses a different approach:
+<itemizedlist>
+ <listitem>DCP L is input L.</listitem>
+ <listitem>DCP R is input R.</listitem>
+ <listitem>DCP C is input L + input R taken down by 3dB.</listitem>
+ <listitem>DCP Lfe is DCP C bandpass filtered between 20Hz and 150Hz.</listitem>
+ <listitem>DCP Ls and Rs are input L - input R with a 20ms delay.</listitem>
+</itemizedlist>
+</listitem>
+</itemizedlist>
+
+<!-- ============================================================== -->
+<section xml:id="sec-reels">
+<title>Reels</title>
+
+<para>
+A ‘reel’ in a DCP is a subsection of the DCP, in the same
+way as a 35mm reel is a section of a film. A DCP can be split up into
+any number of reels and the joins (the equivalent to 35mm splices)
+between the reels are seamless.
+</para>
+
+<para>
+There is no reason why you can't just use a single reel for the whole
+of your DCP, as there is no limit on their length. Many people choose
+to do this.
+</para>
+
+<para>
+There are, however, some possible advantages of splitting things up
+into reels:
+</para>
+
+<itemizedlist>
+<listitem>
+The picture, sound and subtitle data of the DCP will be
+split up into more smaller files on disk, rather than fewer larger
+files. This can be useful if the DCP is to be transferred on storage
+that have file size limits. The FAT32 filesystem, for example, can
+only hold files smaller than 4Gb. A 6Gb DCP with a single reel could
+not be transferred using a FAT32-formatted disk. If that DCP were
+split up into two 3Gb reels it could be transferred.
+</listitem>
+<listitem>
+It is easier to re-use DCP components if they are in reels. Consider,
+for example, a film company who wants to put a 5 second ident onto the
+beginning of DCPs that they distribute. If they receive a feature
+film DCP they can modify it to add their ident as a separate reel.
+This is easier than attaching the picture data in the DCP.
+</listitem>
+</itemizedlist>
+
+<para>
+DCP-o-matic offers three options for setting up the reels in your DCP:
+single reel, split by video content or custom.
+</para>
+
+<para>
+<guilabel>Single reel</guilabel>, as its name suggests, keeps the whole DCP as one reel.
+This is a perfectly good option if you have no particular reason to
+need reels.
+</para>
+
+<para>
+<guilabel>Split by video content</guilabel> puts each piece of source
+video content in its own reel, as shown in <xref linkend="fig-reels-by-video"/>.
+</para>
+
+<figure id="fig-reels-by-video">
+<title>Making reels using split by video content</title>
+<mediaobject><imageobject><imagedata scale="100" fileref="diagrams/reels-by-video&dia;"/></imageobject></mediaobject>
+</figure>
+
+<para>
+Here we have three video files (<code>ident.mp4</code>,
+<code>feature.ts</code> and <code>cred.mov</code>). With
+<guilabel>split by video content</guilabel> DCP-o-matic makes a new
+reel to hold each video file.
+</para>
+
+<para>
+<guilabel>Custom</guilabel> splits reels by the size of the files that
+will make up their video content. With <guilabel>Custom</guilabel>
+you must specify a reel length in Gb. Then no file in the DCP will be larger than this reel length.
+</para>
+
+</section>
+
+
+<!-- ============================================================== -->
+<section xml:id="sec-show-audio">
+<title>Show audio</title>
+
+<para>
+The <guilabel>Show Audio</guilabel> button will instruct DCP-o-matic
+to examine the audio in your content and plot a graph of its level
+over time. This can be useful for getting a rough idea of how loud
+the sound will be in the cinema auditorium. A typical plot is shown
+in <xref linkend="fig-audio-plot"/>
+</para>
+
+<figure id="fig-audio-plot">
+ <title>Audio plot</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="screenshots/audio-plot&scs;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<para>
+The plot gives the audio level (vertical axis, in dB) with time
+(horizontal axis). 0dB represents full scale, so if there is anything
+near this you are in danger of clipping the projector's audio outputs.