]>
<book xmlns="http://docbook.org/ns/docbook" xmlns:mml="http://www.w3.org/1998/Math/MathML" version="5.0" xml:lang="en">
-<!-- By good luck or good management, the scale parameter to imagedata
- appears only to affect PDF output. HTML scaling is done in the
- Makefile.
--->
-
<bookinfo>
-<title>DCP-o-matic</title>
+<title>DCP-o-matic users' manual</title>
<author><firstname>Carl</firstname><surname>Hetherington</surname></author>
</bookinfo>
Hello, and welcome to DCP-o-matic!
</para>
+<!-- ============================================================== -->
<section>
<title>What is DCP-o-matic?</title>
<para>
DCP-o-matic is a program to generate <ulink
url="http://en.wikipedia.org/wiki/Digital_Cinema_Package">Digital
-Cinema Packages</ulink> (DCPs) from DVDs, Blu-Rays, video files such as MP4
-and AVI, or still images. The resulting DCPs will play on modern digital
+Cinema Packages</ulink> (DCPs) from almost any video, audio and/or
+subtitle source files. The resulting DCPs will play on modern digital
cinema projectors.
</para>
-<para>
-You might find it useful to make DVDs easier to present, to encode
-independently-shot feature films, or to generate local advertising for
-your cinema.
-</para>
-
</section>
+
+<!-- ============================================================== -->
<section>
<title>Licence</title>
<para>
-DCP-o-matic is licensed under the <ulink url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">GNU GPL</ulink>.
+DCP-o-matic is free and open-source and is licensed under the <ulink
+url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html">GNU
+GPL</ulink>.
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Acknowledgements</title>
This manual uses icons from the <ulink url="http://tango.freedesktop.org/">Tango Desktop Project</ulink>, with thanks.
</para>
+</section>
+
+<!-- ============================================================== -->
+<section>
+<title>This manual</title>
+
+<para>
+This manual presents bits of DCP-o-matic's user interface (such as menu items or buttons) <guilabel>like this</guilabel>.
+</para>
+
+<note>
+Notes of an advanced nature are presented like this. Ignore them unless you want to know the gory details.
+</note>
+
</section>
</chapter>
+
+<!-- ============================================================== -->
<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
<title>Installation</title>
+
+<!-- ============================================================== -->
<section>
<title>Windows</title>
version.
</para>
+<para>
+If you are still using Windows XP, download the specific XP version as
+it should be more stable on your machine than the ‘normal’
+Windows version.
+</para>
+
</section>
+
+<!-- ============================================================== -->
<section>
<title>Mac OS X</title>
<para>
DCP-o-matic will run on Mac OS X version 10.6 (Snow Leopard) and
-higher. To install it, download the <code>DMG</code> from <ulink
+higher. To install it, download the <code>.dmg</code> from <ulink
url="http://dcpomatic.com/">http://dcpomatic.com/</ulink> and double
-click to open it. Then drag the DCP-o-matic icon to your
+click to open it. Then drag the DCP-o-matics icon to your
<guilabel>Applications</guilabel> folder or wherever else you would
like to install it.
</para>
+<para>
+You do not have to install all the applications, but you must always
+install <code>DCP-o-matic 2.app</code> as the other applications
+depend on it.
+</para>
+
</section>
+<!-- ============================================================== -->
<section>
-<title>Ubuntu Linux</title>
+<title>Debian or Ubuntu Linux</title>
<para>
-You can install DCP-o-matic on Ubuntu 12.04 (‘Precise
-Pangolin’), 12.10 (‘Quantal Quetzal’), 13.10 (‘Saucy
-Salamander’) or 14.04 (‘Trusty Tahr’) using <code>.deb</code> packages: download the
-appropriate package from <ulink
-url="http://dcpomatic.com/">http://dcpomatic.com/</ulink> and
-double-click it. Ubuntu will install the necessary bits and pieces
-and set DCP-o-matic up for you.
+ You can install DCP-o-matic on:
</para>
-</section>
+<itemizedlist>
+ <listitem>Debian 7 (‘wheezy’)</listitem>
+ <listitem>Debian 8 (‘jessie’)</listitem>
+ <listitem>Debian unstable (‘sid’)</listitem>
+ <listitem>Ubuntu 12.04 (‘Precise Pangolin’)</listitem>
+ <listitem>Ubuntu 14.04 (‘Trusty Tahr’)</listitem>
+ <listitem>Ubuntu 16.04 (‘Xenial Xerus’)</listitem>
+</itemizedlist>
-<section>
-<title>Debian Linux</title>
<para>
-Packages are available for Debian 7 (squeeze) from <ulink
-url="http://dcpomatic.com/">http://dcpomatic.com/</ulink>.
+using <code>.deb</code> packages: download the appropriate package
+from <ulink url="http://dcpomatic.com/">http://dcpomatic.com/</ulink>
+and double-click it. Debian or Ubuntu will install the necessary bits and
+pieces and set DCP-o-matic up for you.
</para>
</section>
+<!-- ============================================================== -->
+
+<!-- ============================================================== -->
<section>
-<title>Centos Linux</title>
-<para>
-Packages are available for Centos 6.5 from <ulink
-url="http://dcpomatic.com/">http://dcpomatic.com/</ulink>.
-</para>
+ <title>Fedora Linux</title>
+
+ <para>There are <code>.rpm</code> packages for Fedora 22 and 23 on
+ <ulink url="http://dcpomatic.com/">http://dcpomatic.com/</ulink>
+ </para>
</section>
+<!-- ============================================================== -->
+
+<!-- ============================================================== -->
+<section>
+ <title>Centos Linux</title>
+ <para>There are <code>.rpm</code> packages for Centos 5, 6.5 and 7 on
+ <ulink url="http://dcpomatic.com/">http://dcpomatic.com/</ulink>
+ </para>
+</section>
+<!-- ============================================================== -->
+
+
+<!-- ============================================================== -->
<section>
<title>Arch Linux</title>
<para>
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Other Linux distributions</title>
<para>
-Installation on non-Ubuntu Linux is currently a little involved, as
-there are no packages available (yet); you will have to compile it
-from source. If you are using a non-Ubuntu distribution, do let me
-know via the <ulink url="mailto:carl@dcpomatic.com">mailing
-list</ulink> and I will see about building some packages.
+Installation on other Linux systems (for which no packages are
+available) is quite hard as it must be compiled from source. If you
+can't download packages for your distribution, do let me know by
+<ulink url="mailto:carl@dcpomatic.com">email</ulink> and I will look
+into providing packages on the website.
</para>
<para>
<itemizedlist>
<listitem><ulink url="http://ffmpeg.org/">FFmpeg</ulink></listitem>
<listitem><ulink url="http://www.mega-nerd.com/libsndfile/">libsndfile</ulink></listitem>
+<listitem><ulink url="http://www.mega-nerd.com/SRC/">libsamplerate</ulink></listitem>
<listitem><ulink url="http://www.openssl.org/">OpenSSL</ulink></listitem>
<listitem><ulink url="http://www.openjpeg.org/">libopenjpeg</ulink></listitem>
<listitem><ulink url="http://www.imagemagick.org/script/index.php">ImageMagick</ulink></listitem>
<listitem><ulink url="http://www.libssh.org/">libssh</ulink></listitem>
<listitem><ulink url="http://www.gtk.org/">GTK (on Linux)</ulink></listitem>
<listitem><ulink url="http://www.wxwidgets.org/">wxWidgets</ulink></listitem>
-<listitem><ulink url="http://freecode.com/projects/libquickmail">libquickmail</ulink></listitem>
<listitem><ulink url="http://libxmlplusplus.sourceforge.net/">libxml++</ulink></listitem>
<listitem><ulink url="http://www.aleksey.com/xmlsec/">xmlsec</ulink></listitem>
<listitem><ulink url="http://curl.haxx.se/">curl</ulink></listitem>
<listitem><ulink url="http://www.nih.at/libzip/">libzip</ulink></listitem>
-<listitem><ulink url="http://carlh.net/software/libdcp/">libdcp</ulink></listitem>
-<listitem><ulink url="http://carlh.net/software/libcxml/">libcxml</ulink></listitem>
+<listitem><ulink url="http://carlh.net/libdcp/">libdcp</ulink></listitem>
+<listitem><ulink url="http://carlh.net/libsub/">libsub</ulink></listitem>
+<listitem><ulink url="http://carlh.net/libcxml/">libcxml</ulink></listitem>
+<listitem><ulink url="http://site.icu-project.org">libicu</ulink></listitem>
</itemizedlist>
</para>
</para>
<programlisting>
-dcpomatic
+dcpomatic2
</programlisting>
<para>
</section>
</chapter>
+
+<!-- ============================================================== -->
<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
-<title>Creating a video DCP</title>
+<title>Creating a DCP from a video</title>
<para>
-In this chapter we will see how to create a video DCP using
+In this chapter we will see how to create a DCP from a video file using
DCP-o-matic. We will gloss over the details and look at the basics.
</para>
need some content. Download the low-resolution trailer for the open
movie <ulink url="http://sintel.org/">Sintel</ulink> from <ulink
url="http://ftp.nluug.nl/ftp/graphics/blender/apricot/trailer/Sintel_Trailer1.480p.DivX_Plus_HD.mkv">their
-website</ulink>. Generally, of course, one would want to use the
+website</ulink>. Generally one would want to use the
highest-resolution material available, but for this test we will use
the low-resolution version to save everyone's bandwidth bills.
</para>
</para>
<figure id="fig-file-new">
- <title>Creating a new film</title>
+ <title>Creating a new film</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/file-new&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
</para>
<figure id="fig-video-new-film">
- <title>Dialogue box for creating a new film</title>
+ <title>Dialogue box for creating a new film</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/video-new-film&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Adding content</title>
linkend="fig-video-select-content-file"/>.
</para>
-<figure id="fig-add-file">
- <title>Adding content files</title>
+<figure id="fig-add-file">
+ <title>Adding content files</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/add-file&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
-<figure id="fig-video-select-content-file">
- <title>Selecting a video content file</title>
+<figure id="fig-video-select-content-file">
+ <title>Selecting a video content file</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/video-select-content-file&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
the right of the window, as shown in <xref linkend="fig-examine-content"/>.
</para>
-<figure id="fig-examine-content">
+<figure id="fig-examine-content">
<title>Examining the content</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/examine-content&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
<para>
Dragging the slider will move through your video. You can also click
-the <guilabel>Play</guilabel> button to play the content back. Note
-that there will be no sound, and playback might not be entirely
+the <guilabel>Play</guilabel> button to play the content back. <emphasis>Note
+that there will be no sound</emphasis>, and playback might not be entirely
accurate (it may be slightly slower or faster than it should be, for
example). This player is really only intended for brief inspection of
content; if you need to check it more thoroughly, use another player
+
+<!-- ============================================================== -->
<section>
<title>Making the DCP</title>
<figure id="fig-making-dcp">
<title>Making the DCP</title>
<mediaobject>
- <imageobject>
- <imagedata scale="30" fileref="screenshots/making-dcp&scs;"/>
- </imageobject>
+ <imageobject>
+ <imagedata scale="50" fileref="screenshots/making-dcp&scs;"/>
+ </imageobject>
</mediaobject>
</figure>
</para>
<para>
-Alternatively, if you have a projector or TMS that is accessible via
-SCP across your network, you can upload the content directly from
-DCP-o-matic. See the <xref linkend="sec-prefs-tms" endterm="sec-prefs-tms-short"/>.
+Alternatively, if you have a projector or Theatre Management System
+(TMS) that is accessible via SCP or FTP across your network, you can upload
+the content directly from DCP-o-matic. See the <xref
+linkend="sec-prefs-tms" endterm="sec-prefs-tms-short"/> in <xref linkend="sec-prefs-tms"/>.
</para>
</section>
</chapter>
+
+<!-- ============================================================== -->
<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
-<title>Creating a still-image DCP</title>
+<title>Creating a DCP from a still image</title>
<para>
DCP-o-matic can also be used to create DCPs of one or more still images, perhaps
</para>
<para>
-As with video DCPs, the first step is to create a new
+As with DCPs made from video files, the first step is to create a new
‘Film’; select <guilabel>New</guilabel> from the
<guilabel>File</guilabel> menu and the new film dialogue will open as
shown in <xref linkend="fig-still-new-film"/>.
</para>
-<figure id="fig-still-new-film">
- <title>Dialogue box for creating a new film</title>
+<figure id="fig-still-new-film">
+ <title>Dialogue box for creating a new film</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/still-new-film&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
linkend="fig-still-select-content-file"/>.
</para>
-<figure id="fig-still-select-content-file">
- <title>Selecting a still content file</title>
+<figure id="fig-still-select-content-file">
+ <title>Selecting a still content file</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/still-select-content-file&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
<para>
-As with video DCPs, most of the default settings will be fine for a
-simple test. The one thing that you might wish to change is the
-length of the still. Select the <guilabel>Timing</guilabel> tab and
-you will see a <guilabel>Length</guilabel> setting, as shown in <xref
+Most of the default settings will be fine for a simple test. The one
+thing that you might wish to change is the length of the still.
+Select the <guilabel>Timing</guilabel> tab and you will see a
+<guilabel>Play length</guilabel> setting, as shown in <xref
linkend="fig-timing-tab"/>.
</para>
-<figure id="fig-timing-tab">
+<figure id="fig-timing-tab">
<title>The timing tab</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/timing-tab&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
<para>
Finally, as with video, you can choose <guilabel>Make DCP</guilabel>
from the <guilabel>Jobs</guilabel> menu to create your DCP. This will
-be much quicker than creating a video DCP, as DCP-o-matic only needs
+be much quicker than creating a DCP from a video file, as DCP-o-matic only needs
to encode a single frame which it can then repeat.
</para>
</chapter>
+
+<!-- ============================================================== -->
+<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
+<title>Manipulating existing DCPs</title>
+
+<para>
+Frequently DCP-o-matic is used to take content in formats such as MP4
+and convert it to JPEG2000 for a DCP. It can also be used
+to take existing DCPs and modify them in various ways.
+</para>
+
+<section>
+<title>Importing a DCP into DCP-o-matic</title>
+
+<para>
+If you want to do something to an existing DCP the first step is to
+import it. Click <guilabel>Add folder...</guilabel> and select your
+DCP's folder. It will be added to the DCP-o-matic project. If the
+DCP is unencrypted you can preview it in the normal way, though
+playback will be very slow as decoding of DCPs is almost as
+computationally intensive as encoding them.
+</para>
+
+<para>
+If your DCP is a Version File (VF), in other words it refers to
+another DCP's assets, you should import it as follows:
+</para>
+
+<itemizedlist>
+<listitem>Use <guilabel>Add folder...</guilabel> to import the VF DCP.
+The VF DCP will be added to the content list and marked “NEEDS
+OV”.</listitem>
+<listitem>Right-click on the VF DCP in the content list and choose <guilabel>Add OV...</guilabel> from the menu.</listitem>
+<listitem>Choose the folder that contains the OV DCP. The VF will now be playable as normal.</listitem>
+</itemizedlist>
+
+</section>
+
+
+<section>
+<title>Decrypting encrypted DCPs</title>
+
+<para>
+DCPs can be encrypted (see <xref linkend="ch-encryption"/> for
+details). If you import an encrypted DCP you will need a key, in the
+form of a Key Delivery Message (KDM), to decrypt it.
+</para>
+
+<para>
+KDMs must be prepared by the organisation which created the DCP. They
+contain the keys to decrypt the DCP wrapped up in such a way that only
+the intended recipient can read them. You will need to provide the
+organisation with a certificate which identifies your copy of
+DCP-o-matic and allows them to create a KDM for you.
+</para>
+
+<para>
+To get DCP-o-matic's decryption certificate, open the Preferences
+dialogue (see <xref linkend="ch-preferences"/>) and go to the
+<guilabel>Keys</guilabel> tab. Click the <guilabel>Export DCP
+decryption certificate...</guilabel> button at the bottom of this tab
+and save the certificate. Send this certificate to the DCP creators
+and they can create a KDM to allow DCP-o-matic to decrypt their DCP.
+</para>
+
+<para>
+Once you have your KDM, right-click the DCP's name in DCP-o-matic and
+choose <guilabel>Add KDM...</guilabel>. Specify your KDM and (all
+being well) the DCP will be decrypted and become available for preview.
+</para>
+
+</section>
+
+
+<section>
+<title>Making a DCP from a DCP</title>
+
+<para>
+In many ways, using DCPs as <emphasis>content</emphasis> in
+DCP-o-matic is the same as using any other content. There are a few
+things to note, though.
+</para>
+
+
+<section>
+<title>Re-use of existing data</title>
+
+<para>
+Where possible DCP-o-matic will re-use existing JPEG2000-compressed
+data from DCP content without modification. This has the advantage
+that creation of the new DCP will be quick, as the time-consuming
+JPEG2000 encoding is not necessary.
+</para>
+
+<para>
+DCP-o-matic can do this if you <emphasis>avoid</emphasis> changes to
+the following content settings:
+</para>
+
+<itemizedlist>
+<listitem>Crop</listitem>
+<listitem>Scaling</listitem>
+<listitem>Subtitle burn-in</listitem>
+<listitem>Fades</listitem>
+<listitem>Colour conversion</listitem>
+</itemizedlist>
+
+<para>
+If you do change any of these settings on a piece of DCP content
+DCP-o-matic will decode and then re-encode the JPEG2000 data.
+</para>
+
+</section>
+
+
+<section xml:id="sec-overlay">
+<title>Making overlay files</title>
+
+<para>
+With its default settings, DCP-o-matic will take any data from DCP
+content and copy it into the DCP that it creates. See <xref linkend="fig-dcp-copy"/>.
+</para>
+
+<figure id="fig-dcp-copy">
+<title>Creating a new DCP by copying an existing one</title>
+<mediaobject><imageobject><imagedata scale="100" fileref="diagrams/dcp-copy&dia;"/></imageobject></mediaobject>
+</figure>
+
+<para>
+This can be inefficient in some cases. Consider, for example, a film
+which has ten different translations for which the subtitles are
+different but video and audio are the same. If the video and audio
+content takes up, say, 100Gb this means that the set of DCPs for every
+translation would be about 1Tb with a lot of duplicated data.
+</para>
+
+<para>
+The DCP format has a solution to this problem. One DCP can refer to
+the ‘assets’ (picture, sound or subtitle) of another DCP.
+For our translation example this means that we could have a
+‘base’ DCP (often called the OV or Original Version)
+containing video, audio and one set of subtitles and then any number
+of overlay DCPs (often called VF or Version Files) which refer to the
+base version and replace the original subtitles with their own. <xref
+linkend="fig-dcp-refer"/> shows this principle for one of our
+translations. The DCP that we make refers to the original content
+DCP's video and audio rather than containing a copy.
+</para>
+
+<figure id="fig-dcp-refer">
+<title>Creating a new DCP by referring to an existing one</title>
+<mediaobject><imageobject><imagedata scale="100" fileref="diagrams/dcp-refer&dia;"/></imageobject></mediaobject>
+</figure>
+
+<para>
+To play back the subtitled DCP the projectionist ingests both the base
+(OV) DCP and the overlay (VF) DCP, then plays the VF one.
+</para>
+
+<para>
+To make a DCP like this:
+</para>
+
+<itemizedlist>
+<listitem>Import your ‘Content DCP’ to a DCP-o-matic project.</listitem>
+<listitem>Add whatever replacement you want in your new DCP (replacement subtitles or audio files, for example).</listitem>
+<listitem>Select the DCP in the content list</listitem>
+<listitem>Tick the <guilabel>Refer to existing DCP</guilabel> checkbox
+in the tabs for the parts of the DCP that you want to refer to in your
+new DCP. For example, to refer to the Content DCP's video and audio you would select the <guilabel>Video</guilabel> tab, click <guilabel>Refer to existing DCP</guilabel> then select the <guilabel>Audio</guilabel> tab and do the same.</listitem>
+<listitem>Do <guilabel>Make DCP</guilabel> as usual and your VF DCP will be created.</listitem>
+</itemizedlist>
+
+</section>
+
+</section>
+
+
+
+</chapter>
+<!-- ============================================================== -->
+
+
+<!-- ============================================================== -->
<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
<title>Content settings</title>
<para>
The previous chapters showed DCP generation using the default
settings. DCP-o-matic offers a range of features to adjust the
-content that goes into your DCP, and this chapter describes those features in
-detail.
+content that goes into your DCP, and this chapter describes those
+features in detail.
</para>
<section>
<itemizedlist>
<listitem>Movie — a file containing some video, probably some
-audio and possibly some subtitles; for example, a MOV, MP4 or VOB.
+audio and possibly some embedded subtitles; for example, a MOV, MP4 or VOB.
</listitem>
<listitem>Sound — a file containing one or more channels of
<listitem>Moving image — a directory containing many still
images which should be treated as the frames of a video.
</listitem>
+
+<listitem>Subtitle — a file containing subtitle which will be
+superimposed on the image of the DCP. These can be
+<guilabel>.srt</guilabel>, <guilabel>.ssa</guilabel>, <guilabel>.ass</guilabel> or <guilabel>.xml</guilabel>
+files.</listitem>
+
+<listitem>DCP — an existing DCP.</listitem>
</itemizedlist>
<para>
-To add one or more movie, sound or still-image files, select
+To add one or more movie, sound, still-image or subtitle files, select
<guilabel>Add file(s)...</guilabel> and choose them from the selector.
-To add a directory of images, choose <guilabel>Add
-directory...</guilabel> and do similar.
+</para>
+
+<para>
+To add a directory (folder) of images or a DCP, choose <guilabel>Add
+folder...</guilabel> and choose the directory from the selector. If
+you select a folder of images DCP-o-matic will open a small dialogue
+box where you can enter the frame rate that the image sequence should
+be run at.
</para>
<para>
</para>
</section>
+
+<!-- ============================================================== -->
+<section>
+<title>Adding existing DCPs</title>
+
+<para>Adding existing DCPs to a DCP-o-matic film is a little different
+to adding other types of content. Most content has to be converted to
+JPEG2000, the compression scheme used by DCPs, which is a very
+time-consuming process. Existing DCPs are already in JPEG2000 format
+so do not require conversion. This means that, provided no settings
+such as crop are used on the DCP content, picture and sound data will
+be passed from existing to new DCP unaltered.
+</para>
+
+<para>Encrypted DCPs that are added as content will require a KDM
+targeted at DCP-o-matic so that DCP-o-matic can decrypt them. You
+should ask the creator of the imported DCP to provide a KDM for
+DCP-o-matic's decryption certificate, which can be obtained by
+clicking <guilabel>Export DCP decryption certificate...</guilabel>
+from the <guilabel>Keys</guilabel> tab of the
+<guilabel>Preferences</guilabel> dialog (see <xref
+linkend="sec-prefs-keys"/>).
+</para>
+
+</section>
+
+<!-- ============================================================== -->
<section>
<title>Content Properties</title>
for that piece of content.
</para>
+<para>
+If you want to change the properties for multiple pieces of content at
+the same time, select the content in the list by clicking the first
+piece then clicking the other pieces with <keycap>shift</keycap> key
+held down. Note that not all settings can be changed in this way.
+</para>
+
<para>
The content properties are split up into four sections:
<guilabel>Video</guilabel>, <guilabel>Audio</guilabel>,
</section>
+
+<!-- ============================================================== -->
<section>
<title>Video</title>
The <guilabel>Video</guilabel> tab controls properties of the image, as shown in <xref linkend="fig-video-tab"/>.
</para>
-<figure id="fig-video-tab">
+<figure id="fig-video-tab">
<title>Video settings tab</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/video-tab&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
+
+<!-- ============================================================== -->
+<section>
+<title>Refer to existing DCP</title>
+
+<para>
+This option is only applicable if the selected content is an existing
+DCP. It allows you to get the video content from the existing DCP by
+referencing it (rather than copying). See <xref
+linkend="sec-overlay"/>.
+</para>
+
+</section>
+
+<!-- ============================================================== -->
<section>
<title>Image type</title>
<para>
-The first option on this tab is the ‘type’ of the video.
+The next option on this tab is the ‘type’ of the video.
This specifies how DCP-o-matic should interpret the video's image.
<guilabel>2D</guilabel> is the default; this just takes the video
image as a standard 2D frame. The <guilabel>3D
left-right pair, as shown in <xref linkend="fig-3d-left-right"/>.
</para>
-<figure id="fig-3d-left-right">
+<figure id="fig-3d-left-right">
<title>3D left/right image type</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata scale="100" fileref="diagrams/3d-left-right&dia;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
linkend="fig-3d-top-bottom"/>.
</para>
-<figure id="fig-3d-top-bottom">
+<figure id="fig-3d-top-bottom">
<title>3D top/bottom image type</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata scale="100" fileref="diagrams/3d-top-bottom&dia;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
+<para>
+Another option is <guilabel>3D alternate</guilabel> which takes the
+first frame of the content as for the left eye, the second for the
+right eye, the third for the left, and so on. Finally, you can
+specify <guilabel>3D left only</guilabel> or <guilabel>3D right
+only</guilabel> if this content contains only the the left or right
+eye images. This is useful when you have the left and right eye image
+sets in different files; you can specify one content as <guilabel>3D
+left only</guilabel> and another as <guilabel>3D right only</guilabel>
+and DCP-o-matic will pick up the appropriate frames from each.
+</para>
+
</section>
as shown in <xref linkend="fig-filters"/>.
</para>
-<figure id="fig-filters">
- <title>Filters selector</title>
+<figure id="fig-filters">
+ <title>Filters selector</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/filters&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
</section>
+
+<!-- ============================================================== -->
+<section>
+<title>Colour conversion</title>
+
+<para>
+The <guilabel>Colour conversion</guilabel> setting specifies what
+colour transforms and gamma correction DCP-o-matic will use when
+converting the selected content into the XYZ colourspace for the DCP.
+</para>
+
+<para>
+The easiest way to select the required conversion is to choose one of
+DCP-o-matic's presets. DCP-o-matic knows how to convert from four
+common colourspaces: sRGB, Rec. 601, Rec. 709 and P3. If you do not
+know which preset you should use, refer to the suggestions in <xref
+linkend="tab-colour-conversion"/>.
+</para>
+
+<table id="tab-colour-conversion">
+<title>Suggested colour conversion settings</title>
+<tgroup cols='2' align='left' colsep='1' rowsep='1'>
+<colspec colwidth='1*'/>
+<colspec colwidth='5*'/>
+<tbody>
+<row>
+<entry>sRGB</entry><entry>Still images in RGB, e.g. photographs</entry>.
+</row>
+<row>
+<entry>Rec. 601</entry><entry>Standard-definition content (fewer than about 1000 pixels across) including DVD rips.</entry>
+</row>
+<row>
+<entry>Rec. 709</entry><entry>High-definition content including Blu-Ray rips.</entry>
+</row>
+<row>
+<entry>P3</entry><entry>Content explicitly graded to P3.</entry>
+</row>
+</tbody>
+</tgroup>
+</table>
+
+<para>
+For other required colour conversions, and if you know what you are
+doing, you can choose <guilabel>Custom</guilabel> which will open the full
+colour conversion editing dialogue box:
+</para>
+
+<figure id="fig-colour-conversion">
+ <title>Dialogue box for custom colour conversion</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="screenshots/colour-conversion&scs;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<para>
+Alternatively, choose <guilabel>None</guilabel> if your source files
+are already in the XYZ colour space and require no conversion.
+</para>
+
+<para>
+DCP-o-matic's colour conversion processes are discussed in much more
+detail in a separate document <ulink
+url="http://dcpomatic.com/manual/colour.pdf">colour.pdf</ulink>.
+</para>
+
+</section>
+
<!-- ============================================================== -->
<section>
<title>Other settings</title>
<para>
-The ‘crop’ settings can be used to crop your content,
+The <guilabel>crop</guilabel> settings can be used to crop your content,
which can be used to remove black borders from round the edges of DVD
images, for example. The specified number of pixels will be trimmed
from each edge, and the content image in the right of the window will
be updated to show the effect of the crop.
</para>
+<para>
+The <guilabel>fade in</guilabel> and <guilabel>fade out</guilabel>
+settings can be used to apply linear fades into and out of a piece of
+content. Specify the time for each, clicking <guilabel>Set</guilabel>
+after making any changes.
+</para>
+
<para>
The <guilabel>Scale to</guilabel> option governs the shape that
DCP-o-matic will scale the content's image into. Select the aspect
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Video description</title>
At the bottom of the video tab is a short description of what will
happen to your video with the current settings. In the example of
<xref linkend="fig-video-tab"/>, DCP-o-matic is telling you that the
-video file is 1920x1080 pixels (which is a ratio of 1.78:1). Since
-the controls specify ‘Flat’ for the ratio, DCP-o-matic
-scales the content image to 1998x1080, which is the DCI flat
-resolution at 2K.
+video file is 1920x1080 pixels and it has square pixels (a pixel
+aspect ratio of 1.00) hence its display aspect ratio is 1.78:1. Since
+the controls specify ‘16.9’ for the ratio, DCP-o-matic
+does not scale the image but pads it to the DCP's container ratio of
+1.85:1. For a 2K DCP this is 1998x1080 pixels.
</para>
<para>
This description also gives the frame rate of the content and what
-will happen to it when it is played at the DCP's frame rate.
-<!-- XXX: link to more detailed discussion of this -->
+will happen to it when it is played at the DCP's frame rate. See
+<xref linkend="ch-frame-rates"/> for details of DCP-o-matic's
+frame-rate conversion.
</para>
</section>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Audio</title>
The <guilabel>Audio</guilabel> tab controls properties of the image, as shown in <xref linkend="fig-audio-tab"/>.
</para>
-<figure id="fig-audio-tab">
+<figure id="fig-audio-tab">
<title>Audio settings tab</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/audio-tab&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
+<!-- ============================================================== -->
<section>
-<title>Show audio</title>
-
-<para>
-The <guilabel>Show Audio</guilabel> button will instruct DCP-o-matic
-to examine the audio in your content and plot a graph of its level
-over time. This can be useful for getting a rough idea of how loud
-the sound will be in the cinema auditorium. A typical plot is shown
-in <xref linkend="fig-audio-plot"/>
-</para>
-
-<figure id="fig-audio-plot">
- <title>Audio plot</title>
- <mediaobject>
- <imageobject>
- <imagedata fileref="screenshots/audio-plot&scs;"/>
- </imageobject>
- </mediaobject>
-</figure>
-
-<para>
-The plot gives the audio level (vertical axis, in dB) with time
-(horizontal axis). 0dB represents full scale, so if there is anything
-near this you are in danger of clipping the projector's audio outputs.
-</para>
-
-<para>
-There are two plot types: the peak level and the RMS, which can be
-shown or hidden using the check-boxes on the right hand side of the
-window.
-</para>
+<title>The audio map</title>
<para>
-The channel check-boxes will show or hide the plot(s) for
-the corresponding channels in the DCP.
+The section at the bottom of the audio tab is the ‘audio
+map’. This governs how sound from the content will be arranged
+in the DCP.
</para>
<para>
-The smoothing slider applies a variable degree of temporal smoothing
-to the plots, which can make them easier to read in some cases.
+Down the left-hand side of the map is the list of audio channels in
+the currently-selected piece of content. These are labelled with two
+numbers; the first is the stream index within the content and the
+second is the channel number within that stream. Some content will
+have different streams for different languages or audio mixes. Along
+the top is each channel in the DCP. A green box means that the
+corresponding content channel will be copied into the corresponding
+DCP channel.
</para>
<para>
-Obviously the audio plot is no substitute for listening in an
-auditorium, but it can be useful to get levels in the right rough area.
+When content channels are copied into DCP channels they can be done
+with variable gain. If, for example, you want to copy a channel
+as-is, you can set a gain of 0dB. Alternatively, if you want to mix
+two channels into one, you may want to use a gain of -6dB on each one
+to prevent clipping when the two channels are added.
</para>
-</section>
-
-<section>
-<title>The audio map</title>
-
<para>
-The section at the bottom of the audio tab is the ‘audio
-map’. This governs how sound from the content will be arranged
-in the DCP.
+The green boxes of the audio mapping view tell you (very roughly) how
+much gain is applied to each channel. A full-height box means 0dB
+(i.e. unity) gain. Any less height indicates lower gain.
</para>
<para>
-Down the left-hand side of the map is the list of audio channels in
-the currently-selected piece of content. Along the top is each
-channel in the DCP. A checked box means that the corresponding
-content channel will be copied into the corresponding DCP channel.
+To map one channel to another with 0dB gain, click in the empty box
+and it will turn green to reflect the mapping. A second click will
+turn the mapping back off. To set some other gain, right-click on the
+box to open the gain menu. This allows you to set
+<guilabel>Off</guilabel> (no mapping or negative infinity gain),
+<guilabel>Full</guilabel> (0dB gain), -6dB gain or
+<guilabel>Edit</guilabel> which allows you to set the required gain
+precisely.
</para>
<para>
<figure id="fig-audio-map-eg1">
<title>Audio map example 1</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/audio-map-eg1&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
<para>
Here, we have two channels in the source which are mapped to left and
-right, respectively, in the DCP. If we modify that as in <xref
-linkend="fig-audio-map-eg2"/>
+right, respectively, in the DCP. The full green boxes show that the
+mapping is at unity gain (0dB) in each case. Imagine that we modify
+the settings to those shown in <xref linkend="fig-audio-map-eg2"/>
</para>
<figure id="fig-audio-map-eg2">
<title>Audio map example 2</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/audio-map-eg2&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
<para>
-we now have the content's streams mapped to left and right and also
-mixed together and placed in the DCP's centre channel.
+We now have the content's streams mapped to left and right and also
+mixed together and placed in the DCP's centre channel. The smaller
+green boxes on the centre mappings show that those channels are added
+with some non-unity gain; you can see by hovering the mouse pointer
+over those boxes that the gain for content channels 1 and 2 is -6dB
+when being sent to the centre channel and 0dB when being sent to left
+and right.
</para>
<figure id="fig-audio-map-eg3">
<title>Audio map example 3</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/audio-map-eg3&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
</section>
+
+<!-- ============================================================== -->
<section>
-<title>Other controls</title>
+ <title>Other controls</title>
+
+<para>
+The <guilabel>Refer to existing DCP</guilabel> checkbox isonly
+applicable if the selected content is an existing DCP. It allows you
+to get the audio content from the existing DCP by referencing it
+(rather than copying). See <xref linkend="sec-overlay"/>.
+</para>
+
+<para>
+<guilabel>Show graphs of audio levels</guilabel> will analyse the
+audio of the selected content and plot it on a graph. See <xref
+linkend="sec-show-audio"/> for more details.
+</para>
<para>
‘Audio Gain’ is used to alter the volume of the
linkend="fig-calculate-audio-gain"/> will open.
</para>
-<figure id="fig-calculate-audio-gain">
+<figure id="fig-calculate-audio-gain">
<title>Calculating audio gain</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/calculate-audio-gain&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
with respect to the video, and a negative delay will move it earlier.
</para>
-<para>
-The <guilabel>Audio Stream</guilabel> option allows you to select the
-audio stream to use, if the content contains more than one. There
-might be different soundtrack languages, for example.
-</para>
-
</section>
</section>
+<!-- ============================================================== -->
<section>
<title>Subtitles</title>
content, as shown in <xref linkend="fig-subtitles-tab"/>.
</para>
-<figure id="fig-subtitles-tab">
+<figure id="fig-subtitles-tab">
<title>Subtitle settings tab</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/subtitles-tab&scs;"/>
- </imageobject>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<para>
+DCP-o-matic can either:
+</para>
+
+<itemizedlist>
+ <listitem>Extract subtitles that are embedded in video files, or</listitem>
+ <listitem>Use subtitles from SubRip (<code>.srt</code>), SubStation
+ Alpha (<code>.ssa</code>) or DCP XML files. You may find the great
+ free program <ulink
+ url="http://www.nikse.dk/subtitleedit/">Subtitle Edit</ulink> useful
+ for creating such files.</listitem>
+</itemizedlist>
+
+<para>
+Embedded subtitles are usually represented using a set of bitmaps,
+especially on files that have come from DVD or BluRay. Such subtitles
+can (currently) only be ‘burnt’ into the DCP (that is,
+they are included in the image and not overlaid by the projector).
+</para>
+
+<para>
+With SubRip, SubStation Alpha or DCP subtitles you have the choice to
+either burn-in or include the subtitles as separate subtitle
+‘asset’ within your DCP (in which case the projector
+overlays them onto the image on playback). The difference between
+burn-in and overlay is illustrated by <xref linkend="fig-burn-in"/>
+and <xref linkend="fig-discrete"/>.
+</para>
+
+<figure id="fig-burn-in">
+ <title>Burnt-in subtitles</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="100" fileref="diagrams/burn-in&dia;"/>
+ </imageobject>
</mediaobject>
</figure>
+<figure id="fig-discrete">
+ <title>Separate subtitles</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="100" fileref="diagrams/discrete&dia;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<para>
+The advantage of separate subtitles is that the same video content can
+be used for DCPs in many different languages. This means that only a
+small text file needs to be changed for each target language, rather
+than a large video file. It also means that the time-consuming video
+encoding need only be done once for the project rather than once for
+every language.
+</para>
+
+<para>
+Select the <guilabel>Use Subtitles</guilabel> check-box to enable
+the subtitles in the selected content.
+</para>
+
+<para>
+Select the <guilabel>Burn subtitles into image</guilabel> check-box to
+burn these subtitles into the image; if this is not ticked the
+subtitles will be included separately in the DCP to be rendered by the
+projector. This check-box will always be ticked if you are using
+embedded ‘image’ subtitles.
+</para>
+
+<para>
+The <guilabel>X Offset</guilabel> and <guilabel>Y Offset</guilabel>
+controls move the subtitles around within the image. The offsets are
+expressed as a percentage of the video frame size; 100% X offset is
+the entire width of the frame, and 100% Y offset is the entire height.
+Hence, to move the subtitles down by half the frame height you would
+use a Y offset of 50%.
+</para>
+
+<para>
+The <guilabel>X Scale</guilabel> and <guilabel>Y Scale</guilabel>
+controls scale the subtitles. Scale values of 1 make the subtitles
+the same size (relative to the size of the image) as they are on the
+original. Values lower than 1 make them smaller, and values higher
+make them larger. You can stretch the subtitles in either direction
+by specifying different values for X and Y scale. Subtitles from DVD
+and Blu Ray sources are frequently larger (relative to the video
+frame) than those typically used for DCP, so it is often useful to
+scale such subtitles down using these controls.
+</para>
+
<para>
-DCP-o-matic will extract subtitles from the content, if present, and
-they can be ‘burnt into’ the DCP (that is, they are
-included in the image and not overlaid by the projector). Note that
-DVD and Blu-Ray subtitles are stored as bitmaps, so it is not possible
-(automatically) to use non-burnt-in subtitles with these sources.
-Select the <guilabel>With Subtitles</guilabel> check-box to enable
-subtitles. The <guilabel>offset</guilabel> control moves the
-subtitles up and down the image, and the <guilabel>scale</guilabel>
-control changes their size.
+The <guilabel>Line spacing</guilabel> control adjusts the line spacing
+of the subtitles. This only works for non-embedded (text) subtitles.
</para>
<para>
-All being well, future versions of DCP-o-matic will include the option to
-use text subtitles (as is the norm with most professionally-mastered
-DCPs).
+The <guilabel>Stream</guilabel> control changes the subtitle stream
+that is used when the content has more than one.
+</para>
+
+<para>
+If you are using non-embedded (text) subtitles you can see the
+subtitle text and timings by clicking the <guilabel>View...</guilabel>
+button, or specify the fonts that should be used by clicking <guilabel>Fonts...</guilabel>.
+</para>
+
+<para>
+With any subtitles you can click <guilabel>Appearance...</guilabel> to
+change how the subtitles look.
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Timing</title>
content, as shown in <xref linkend="fig-timing-tab-detail"/>.
</para>
-<figure id="fig-timing-tab-detail">
+<figure id="fig-timing-tab-detail">
<title>Timing settings tab</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/timing-tab&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
linkend="fig-timecode"/>.
</para>
-<figure id="fig-timecode">
+<figure id="fig-timecode">
<title>Timecode</title>
<mediaobject>
- <imageobject>
- <imagedata fileref="diagrams/timecode&dia;"/>
- </imageobject>
+ <imageobject>
+ <imagedata scale="100" fileref="diagrams/timecode&dia;"/>
+ </imageobject>
</mediaobject>
</figure>
</para>
<para>
-<guilabel>Trim from start</guilabel> specifies the amount that should be trimmed from the start of the content.
+<guilabel>Trim from start</guilabel> specifies the amount that should
+be trimmed from the start of the content. You can set this amount to
+trim up to the current preview position by clicking <guilabel>Trim up
+to current position</guilabel>.
</para>
<para>
-<guilabel>Trim from end</guilabel> specifies the amount that should be trimmed from the end of the content.
+<guilabel>Trim from end</guilabel> specifies the amount that should be
+trimmed from the end of the content. You can set this amount to trim
+after the current preview position by clicking <guilabel>Trim after to
+current position</guilabel>.
</para>
<para>
</para>
<para>
-<guilabel>Video frame rate</guilabel> specifies the frame rate for still-image content.
+<guilabel>Video frame rate</guilabel> specifies the frame rate for
+still-image content. It can also be used to override the detected
+frame rate of other content if DCP-o-matic has got it wrong.
</para>
<para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Video processing pipeline</title>
linkend="fig-pipeline1"/>.
</para>
-<figure id="fig-pipeline1">
+<figure id="fig-pipeline1">
<title>Example image to demonstrate video processing</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata scale="100" fileref="diagrams/pipeline1&dia;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
linkend="fig-pipeline2"/>.
</para>
-<figure id="fig-pipeline2">
+<figure id="fig-pipeline2">
<title>Example image after cropping</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata scale="100" fileref="diagrams/pipeline2&dia;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
in <xref linkend="fig-pipeline3"/>.
</para>
-<figure id="fig-pipeline3">
+<figure id="fig-pipeline3">
<title>Example image after cropping and scaling</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata scale="100" fileref="diagrams/pipeline3&dia;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
linkend="fig-pipeline3"/>.
</para>
-<figure id="fig-pipeline4">
+<figure id="fig-pipeline4">
<title>Example image in the DCP</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata scale="100" fileref="diagrams/pipeline4&dia;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
the main window, as shown in <xref linkend="fig-dcp-tab"/>.
</para>
-<figure id="fig-dcp-tab">
+<figure id="fig-dcp-tab">
<title>DCP settings tab</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/dcp-tab&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
name</guilabel> is not ticked, the name that you specify will be used
as-is for the name of the DCP. If <guilabel>Use ISDCF name</guilabel>
is ticked, the name that you enter will be used as part of a
-ISDCF-compliant name.
+ISDCF-compliant name.
</para>
<para>
</para>
<para>
-If the DCP name is long, it may not all be visible. You can see the
-full name by hovering the mouse pointer over the partial name.
+If you want to take the ISDCF-compliant name that DCP-o-matic
+generates and modify it, click <guilabel>Copy as name</guilabel> and
+the ISDCF name will be copied into the <guilabel>Name</guilabel> box.
+You can then edit it as you wish. The DCP name should not matter (in
+that it should not affect how the DCP ingests or plays) but
+projectionists will appreciate it if you use the standard naming
+scheme as it makes it easier to identify details of the content.
+</para>
+
+<para>
+The <guilabel>Content Type</guilabel> option can be
+‘feature’, ‘trailer’ or whatever; select the
+required type from the drop-down list. On some projection systems
+this will affect where your content appears in the projector's server
+user interface, so take care to select an appropriate type.
+</para>
+
+<para>
+The <guilabel>Signed</guilabel> check-box sets whether or not the DCP
+is signed. This is rarely important; if in doubt, tick it.
+</para>
+
+<para>
+The <guilabel>Encrypted</guilabel> check-box will set whether the DCP
+should be encrypted or not. If this is ticked, the DCP will require a
+KDM to play back. Encryption is discussed in <xref
+linkend="ch-encryption"/>.
+</para>
+
+<para>
+If you use encryption DCP-o-matic will generate a random encryption
+key for you. To specify your own key, click the
+<guilabel>Edit..</guilabel> button next to the key.
+</para>
+
+<para>
+The <guilabel>Reels</guilabel> and <guilabel>Reel length</guilabel>
+controls specify how the DCP will be split up into
+‘reels’. See <xref linkend="sec-reels"/> below.
+</para>
+
+<para>
+The <guilabel>Standard</guilabel> option specifies which of the two
+DCP standards DCP-o-matic should use. If in doubt, use SMPTE (the
+more modern of the two).
+</para>
+
+<para>
+Ticking the <guilabel>Upload DCP to TMS after it is made</guilabel>
+will ask DCP-o-matic to copy the finished DCP to your configured TMS (see <xref linkend="sec-prefs-tms"/>).
+</para>
+
+<para>
+At the bottom of the DCP tab are a further two tabs, one each to
+contain the settings for the DCP's video and audio parts.
</para>
<para>
for the content's ratio and ‘Flat’ for the DCP.
</para>
-<para>
-Next up is the content type. This can be
-‘feature’, ‘trailer’ or whatever; select the
-required type from the drop-down list.
-</para>
-
<para>
The <guilabel>Frame Rate</guilabel> control sets the frame rate of
your DCP. This can be a little tricky to get right. Ideally, you
</para>
<para>
-The <guilabel>Signed</guilabel> check-box sets whether or not the DCP
-is signed. This is rarely important; if in doubt, tick it.
+The <guilabel>Use best</guilabel> button sets the DCP video frame rate
+to what DCP-o-matic thinks is the best given the content that you have
+added.
+</para>
+
+<para>
+The <guilabel>3D</guilabel> button will set your DCP to 3D mode if it
+is checked. A 3D DCP will then be created, and any 2D content will be
+made 3D compatible by repeating the same frame for both left and right
+eyes. A 3D DCP can be played back on many 3D systems (e.g. Dolby 3D,
+Real-D etc.) but not on a 2D system.
+</para>
+
+<para>
+The <guilabel>Resolution</guilabel> tab allows you to choose the
+resolution for your DCP. Use 2K unless you have content that is of
+high enough resolution to be worth presenting in 4K.
+</para>
+
+<para>
+The <guilabel>JPEG2000 bandwidth</guilabel>; setting changes how big
+the final image files used within the DCP will be. Larger numbers
+will give better quality, but correspondingly larger DCPs. The
+bandwidth can be between 50 and 250 megabits per second (Mbit/s).
+Most commercial DCPs use bit rates between 75 and 125 MBit/s.
+</para>
+
+<para>
+The <guilabel>Audio Channels</guilabel> control sets the number of
+audio channels that the DCP will have. If the DCP has any channels
+for which there is no content audio they will be replaced by silence.
+You can only set an even number of channels here, since that is
+required by the DCI standard. If you want an odd number of channels,
+set the DCP channel count to one greater than you need and the
+unused channel will be filled with silence.
+</para>
+
+<para>
+The <guilabel>Processor</guilabel> control allows you to select a
+process to apply to the audio before it goes into the DCP. Three processes are currently provided:
+</para>
+
+<itemizedlist>
+<listitem>Mid-side decode — this will take a L/R
+stereo input and extract the common part (corresponding to the
+‘Mid’ in a mid-side signal) into the DCP's centre channel.
+The remaining L/R parts will be kept in the L/R channels of the DCP.
+This may be useful to make near-field L/R mixes more compatible with
+cinema audio systems.</listitem>
+<listitem>Stereo to 5.1 up-mixer A — this will take a stereo input and up-mix it to ‘fake’ 5.1. The input L/R are treated as follows:
+<itemizedlist>
+<listitem>DCP L is input L bandpass-filtered between 1.9kHz and 4.8kHz.</listitem>
+<listitem>DCP R is input R bandpass-filtered between 1.9kHz and 4.8kHz.</listitem>
+<listitem>DCP C is input L mixed with input R, taken down by 3dB and then bandpass-filtered between 150Hz and 1.9kHz.</listitem>
+<listitem>DCP Lfe is input L mixed with input R, taken down by 3dB and then bandpass-filtered between 20Hz and 150Hz.</listitem>
+<listitem>DCP Ls is input L bandpass-filtered between 4.8kHz and 20kHz.</listitem>
+<listitem>DCP Rs is input R bandpass-filtered between 4.8kHz and 20kHz.</listitem>
+</itemizedlist>
+<para>
+This upmixing algorithm is due to Gérald Maruccia.
+</para>
+</listitem>
+<listitem>Stereo to 5.1 up-mixer B — this uses a different approach:
+<itemizedlist>
+ <listitem>DCP L is input L.</listitem>
+ <listitem>DCP R is input R.</listitem>
+ <listitem>DCP C is input L + input R taken down by 3dB.</listitem>
+ <listitem>DCP Lfe is DCP C bandpass filtered between 20Hz and 150Hz.</listitem>
+ <listitem>DCP Ls and Rs are input L - input R with a 20ms delay.</listitem>
+</itemizedlist>
+</listitem>
+</itemizedlist>
+
+<!-- ============================================================== -->
+<section xml:id="sec-reels">
+<title>Reels</title>
+
+<para>
+A ‘reel’ in a DCP is a subsection of the DCP, in the same
+way as a 35mm reel is a section of a film. A DCP can be split up into
+any number of reels and the joins (the equivalent to 35mm splices)
+between the reels are seamless.
+</para>
+
+<para>
+There is no reason why you can't just use a single reel for the whole
+of your DCP, as there is no limit on their length. Many people choose
+to do this.
+</para>
+
+<para>
+There are, however, some possible advantages of splitting things up
+into reels:
+</para>
+
+<itemizedlist>
+<listitem>
+The picture, sound and subtitle data of the DCP will be
+split up into more smaller files on disk, rather than fewer larger
+files. This can be useful if the DCP is to be transferred on storage
+that have file size limits. The FAT32 filesystem, for example, can
+only hold files smaller than 4Gb. A 6Gb DCP with a single reel could
+not be transferred using a FAT32-formatted disk. If that DCP were
+split up into two 3Gb reels it could be transferred.
+</listitem>
+<listitem>
+It is easier to re-use DCP components if they are in reels. Consider,
+for example, a film company who wants to put a 5 second ident onto the
+beginning of DCPs that they distribute. If they receive a feature
+film DCP they can modify it to add their ident as a separate reel.
+This is easier than attaching the picture data in the DCP.
+</listitem>
+</itemizedlist>
+
+<para>
+DCP-o-matic offers three options for setting up the reels in your DCP:
+single reel, split by video content or custom.
+</para>
+
+<para>
+<guilabel>Single reel</guilabel>, as its name suggests, keeps the whole DCP as one reel.
+This is a perfectly good option if you have no particular reason to
+need reels.
+</para>
+
+<para>
+<guilabel>Split by video content</guilabel> puts each piece of source
+video content in its own reel, as shown in <xref linkend="fig-reels-by-video"/>.
+</para>
+
+<figure id="fig-reels-by-video">
+<title>Making reels using split by video content</title>
+<mediaobject><imageobject><imagedata scale="100" fileref="diagrams/reels-by-video&dia;"/></imageobject></mediaobject>
+</figure>
+
+<para>
+Here we have three video files (<code>ident.mp4</code>,
+<code>feature.ts</code> and <code>cred.mov</code>). With
+<guilabel>split by video content</guilabel> DCP-o-matic makes a new
+reel to hold each video file.
+</para>
+
+<para>
+<guilabel>Custom</guilabel> splits reels by the size of the files that
+will make up their video content. With <guilabel>Custom</guilabel>
+you must specify a reel length in Gb. Then no file in the DCP will be larger than this reel length.
+</para>
+
+</section>
+
+
+<!-- ============================================================== -->
+<section xml:id="sec-show-audio">
+<title>Show audio</title>
+
+<para>
+The <guilabel>Show Audio</guilabel> button will instruct DCP-o-matic
+to examine the audio in your content and plot a graph of its level
+over time. This can be useful for getting a rough idea of how loud
+the sound will be in the cinema auditorium. A typical plot is shown
+in <xref linkend="fig-audio-plot"/>
+</para>
+
+<figure id="fig-audio-plot">
+ <title>Audio plot</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="screenshots/audio-plot&scs;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<para>
+The plot gives the audio level (vertical axis, in dB) with time
+(horizontal axis). 0dB represents full scale, so if there is anything
+near this you are in danger of clipping the projector's audio outputs.
</para>
<para>
-The <guilabel>Encrypted</guilabel> check-box will set whether the DCP
-should be encrypted or not. If this is ticked, the DCP will require a
-KDM to play back. Encryption is discussed in <xref
-linkend="ch-encryption"/>.
+There are two plot types: the peak level and the RMS, which can be
+shown or hidden using the check-boxes on the right hand side of the
+window.
</para>
<para>
-The <guilabel>Use best</guilabel> button sets the DCP video frame rate
-to what DCP-o-matic thinks is the best given the content that you have
-added.
+The channel check-boxes will show or hide the plot(s) for
+the corresponding channels in the DCP.
</para>
<para>
-The <guilabel>Audio Channels</guilabel> control sets the number of
-audio channels that the DCP will have. If the DCP has any channels
-for which there is no content audio they will be replaced by silence.
+The smoothing slider applies a variable degree of temporal smoothing
+to the plots, which can make them easier to read in some cases.
</para>
<para>
-The <guilabel>3D</guilabel> button will set your DCP to 3D mode if it
-is checked. A 3D DCP will then be created, and any 2D content will be
-made 3D compatible by repeating the same frame for both left and right
-eyes. A 3D DCP can be played back on many 3D systems (e.g. Dolby 3D,
-Real-D etc.) but not on a 2D system.
+Obviously the audio plot is no substitute for listening in an
+auditorium, but it can be useful to get levels in the right rough area.
</para>
-<para>
-The <guilabel>Resolution</guilabel> tab allows you to choose the
-resolution for your DCP. Use 2K unless you have content that is of
-high enough resolution to be worth presenting in 4K.
-</para>
+</section>
+
+</chapter>
+
+
+<!-- ============================================================== -->
+<chapter xml:id="ch-templates" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
+<title>Templates</title>
<para>
-The <guilabel>JPEG2000 bandwidth</guilabel>; setting changes how big the final
-image files used within the DCP will be. Larger numbers will give
-better quality, but correspondingly larger DCPs. The bandwidth can be
-between 50 and 250 megabits per second (Mbit/s).
+If you frequently make DCPs with similar settings you may find it
+useful to use templates.
</para>
<para>
-The <guilabel>Standard</guilabel> option specifies which of the two
-DCP standards DCP-o-matic should use. If in doubt, use SMPTE (the
-more modern of the two).
+Say, for example, you often make 4K feature DCPs from video files in
+’scope at 25fps. You can speed up this process by following
+these steps:
</para>
+<itemizedlist>
+ <listitem>Create a film with any content and set it up how you like;
+ in our example, set the content to scale to DCP, the DCP resolution
+ to 4K, and so on.</listitem>
+ <listitem>Choose <guilabel>Save as template...</guilabel> from the <guilabel>File</guilabel> menu.</listitem>
+ <listitem>Enter a name for your template.</listitem>
+</itemizedlist>
+
<para>
-Finally, the <guilabel>Scaler</guilabel> is the method that will be used to scale up
-your content to the required size for the DCP, if required. Bicubic is a fine choice in
-most situations.
+Then in the future you can create a new film, tick the
+<guilabel>Template</guilabel> box and choose your previously-saved
+template. The basic film's settings will come from your template, and
+when you add some content it will take on the settings of the
+first similarly-typed piece of content in your template.
</para>
</chapter>
+
+
+<!-- ============================================================== -->
<chapter xml:id="ch-encryption" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
<title>Encryption</title>
DCP-o-matic can create encrypted DCPs and KDMs for them.
</para>
+
+<!-- ============================================================== -->
<section>
<title>Basics</title>
delivery message (KDM) can play the DCP.
</para>
+
+<!-- ============================================================== -->
<section>
<title>How it works (in a nutshell)</title>
</para>
<para>
-We suppose that we are trying to distribute a DCP to
-Alice's cinema, without a troublemaker called Mallory being able to
+We suppose that we are trying to send a DCP to
+Alice's cinema without a troublemaker called Mallory being able to
watch it himself.
</para>
</para>
<para>
-The clever bit in DCP encryption requires the use of public-key
+The clever bit in the process requires the use of public-key
encryption. With this technique we can encrypt a block of data using
some ‘public’ key. That data can then only be decrypted
-using a <emphasis>different</emphasis> ‘private’ key. The
-private and public keys are related mathematically, but it is
+using a corresponding private key which is
+<emphasis>different</emphasis> to the public key. The private and
+public keys form a pair which are related mathematically, but it is
extremely hard (or rather, virtually impossible) to derive the private
key from the public key.
</para>
</section>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Encryption using DCP-o-matic</title>
<para>
The first part is simple: ticking the <guilabel>Encrypted</guilabel>
-box in the <guilabel>DCP</guilabel> tab of DCP-o-matic will encrypt
-the DCP using a random key that DCP-o-matic generates. The key will
-be written to the film's metadata file, which should be kept
-secure.
+box in the <guilabel>DCP</guilabel> tab will instruct DCP-o-matic to
+encrypt the DCP that it makes using a random key that DCP-o-matic
+generates. The key will be written to the film's metadata file, which
+should be kept secure.
</para>
<para>
</para>
<para>
-The second part is to generate KDMs for the cinemas that you wish to
-allow to play your DCP. This is done using the <guilabel>Make
-KDMs</guilabel> option on the <guilabel>Jobs</guilabel> menu. This
-will open the KDM dialogue box, as shown in <xref linkend="fig-kdm"/>.
+The second part of distributions is to generate KDMs for the cinemas
+that you wish to allow to play your DCP. There are two approaches to
+this within DCP-o-matic: using the project, or using a DKDM. These
+approaches are now described in turn.
+</para>
+
+<section>
+<title>Creating KDMs from a DCP-o-matic project</title>
+
+<para>
+You can create KDMs from inside a DCP-o-matic project using the
+<guilabel>Make KDMs</guilabel> option on the <guilabel>Jobs</guilabel>
+menu. This will open the KDM dialogue box, as shown in <xref
+linkend="fig-kdm"/>.
</para>
<figure id="fig-kdm">
- <title>KDM dialog</title>
+ <title>KDM dialog</title>
<mediaobject>
- <imageobject>
- <imagedata fileref="screenshots/kdm&scs;"/>
- </imageobject>
+ <imageobject>
+ <imagedata scale="40" fileref="screenshots/kdm&scs;"/>
+ </imageobject>
</mediaobject>
</figure>
</para>
<para>
-DCP-o-matic can store these certificates to make life easier. It
-stores details of cinemas and screens within those cinemas. Each
-screen has a certificate for its projector. DCP-o-matic can generate
-KDMs for any screens that it knows about.
+DCP-o-matic can store these certificates along with details of their
+cinemas and screens within those cinemas. Each screen has a
+certificate for its projector (and optionally certificates for other
+trusted devices, such as the sound processor). DCP-o-matic can
+generate KDMs for any screens that it knows about.
</para>
<para>
To add a cinema, click <guilabel>Add Cinema...</guilabel>. This opens
a dialogue box into which you can enter the cinema's name, and
optionally an email address. This email address can be used to
-get DCP-o-matic to deliver KDMs via email, but it is optional.
+get DCP-o-matic to deliver KDMs via email.
</para>
<para>
</para>
<para>
-Once you have set up all the screens that you need KDMs for,
-DCP-o-matic can generate KDMs for the last DCP that you generated for
-the currently-loaded film. Select the cinemas and/or screens that you
-want KDMs for and fill in the start and end dates and times.
+Alternatively, certificates for projection systems made by some
+manufacturers can be downloaded from databases provided by the
+manufacturer. Currently this is supported for Doremi and Dolby
+equipment. If you are targeting a screen with equipment by one of
+these manufacturers you can click <guilabel>Download</guilabel> then
+enter the serial number of the server in the screen and click
+<guilabel>Download</guilabel> again and, all being well, the certificate
+will be fetched.
+</para>
+
+<para>
+Using the download system you will need to know the serial number of
+the media server in use in the screen. Most cinema projection or
+technical departments will know these serial numbers.
+</para>
+
+<para>
+Note that the reliability of the manufacturers' certificate databases
+cannot be guaranteed. It is vital that KDMs are tested by the
+destination cinema will in advance of show time to identify any
+problems.
+</para>
+
+<para>
+Once you have set up all the screens that you need KDMs for, select
+the CPL that you want to create the KDM for. You can use the
+drop-down list to select the CPLs in the current film project, or load
+a CPL from somewhere else. Select the cinemas and/or screens that you
+want KDMs for and fill in the start and end dates and times.
+</para>
+
+<para>
+You must also select the type of KDM that you want to generate. If in
+doubt, use <guilabel>Modified Transitional 1</guilabel>.
</para>
+<note>
+The differences between the three KDM types are fairly subtle.
+<guilabel>DCI Specific</guilabel> and <guilabel>DCI Any</guilabel> add
+a <code><ContentAuthenticator></code> tag to the KDM which
+allows the exhibitor to check that the DCP and KDM have come from a
+bona-fide source. In addition, <guilabel>DCI Specific</guilabel> adds
+information on trusted devices to the KDM. This allows the KDM
+creator to specify devices (such as sound processors) that are allowed
+to use keys delivered by the KDM. At present it is not clear how
+widely the <guilabel>DCI Specific</guilabel> and <guilabel>DCI
+Any</guilabel> features are supported (or even tolerated) by servers
+so you are advised to use <guilabel>Modified Transitional
+1</guilabel>.
+</note>
+
<para>
Finally, choose what you want to do with the KDMs. They can be
written to disk, to a location that you can specify by clicking
<guilabel>Browse</guilabel>. Alternatively, if you choose
<guilabel>Send by email</guilabel> the KDMs will be zipped up and
-emailed to the appropriate cinema email addresses. Click OK to
-generate the KDMs.
+emailed to the appropriate cinema email addresses. Click
+<guilabel>Make KDMs</guilabel> to generate the KDMs.
+</para>
+
+</section>
+
+<section>
+<title>Creating KDMs using a DKDM</title>
+</section>
+
+<para>
+It can be inconvenient to need a whole DCP-o-matic project just to
+create KDMs for its film. Perhaps you want to archive the project to
+save space, or create KDMs on a different machine. In such situations
+it is easier to use a DKDM. This is a normal KDM, but instead of
+being targeted at a projection system (to allow it to decrypt the
+content) it is targeted at a particular users's certificate. This
+means that the certificate owner can create new KDMs for other users.
+The DKDM holds everything that is required to create further KDMs.
+</para>
+
+<para>
+Sometimes it is useful to create DKDMs that can be used by
+DCP-o-matic. If you create such a DKDM you can keep it and then, at
+any point in the future, use DCP-o-matic's standalone KDM creator to
+make KDMs for the DKDM's film for any cinema.
+</para>
+
+<para>
+In other cases a DKDM is sent to a 3rd party so that they can create
+KDMs for your films. This can be useful if, for example, you have a
+distributor who provides 24-hour KDM support to cinemas and can create
+KDMs for anybody that requires them at short notice.
+</para>
+
+<para>
+To create a DKDM for DCP-o-matic, open your encrypted project and
+select <guilabel>Make DKDM for DCP-o-matic...</guilabel> from the
+<guilabel>Jobs</guilabel> menu. Select the CPL that you want to make
+the DKDM for and click <guilabel>OK</guilabel>. This DKDM will then
+be available in the KDM creator. This is a separate program which you
+can start from the same place that you start the ‘normal’
+DCP-o-matic. Its window is shown in <xref linkend="fig-kdm-creator"/>.
+</para>
+
+<figure id="fig-kdm-creator">
+ <title>The KDM creator</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata scale="35" fileref="screenshots/kdm-creator&scs;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<para>
+To create KDMs, select the cinema(s) and/or screens that you want KDMs
+to be created for, the date range, the DCP that the KDMs are for and
+the destination for the KDMs and click <guilabel>Create
+KDMs</guilabel>.
+</para>
+
+<para>
+By default the <guilabel>DKDM</guilabel> list will list any DCPs for
+which you have clicked <guilabel>Make DKDM for
+DCP-o-matic</guilabel>in the main DCP-o-matic program. If you have
+other DKDMs you can add them by clicking <guilabel>Add...</guilabel> and
+specifying the file containing the DKDM.
+</para>
+
+<para>
+If another organisation wants to send you a DKDM they will ask you for
+a target certificate. You can get DCP-o-matic's target certificate by
+opening <guilabel>Preferences</guilabel> and clicking <guilabel>Export
+DCP decryption certificate...</guilabel> in the <guilabel>Keys</guilabel>
+tab.
+
</para>
</section>
+<section>
+<title>Encryption overview</title>
+
+<figure id="fig-encryption-overview">
+ <title>Overview of encryption</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="diagrams/crypt&dia;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+</section>
</chapter>
+
+<!-- ============================================================== -->
<chapter xml:id="ch-preferences" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
<title>Preferences</title>
behaviour. This chapter explains those options.
</para>
-<section>
-<title>The preferences dialogue</title>
-
<para>
-The preferences dialogue is opened by choosing
+Preferences can be edited by choosing
<guilabel>Preferences...</guilabel> from the <guilabel>Edit</guilabel>
-menu. The dialogue is split into five tabs.
+menu. This opens a dialogue which is split into seven tabs.
</para>
+<!-- ============================================================== -->
<section>
-<title>Miscellaneous</title>
+<title>General</title>
<para>
-The miscellaneous tab is shown in <xref linkend="fig-prefs-misc"/>.
+The general tab is shown in <xref linkend="fig-prefs-general"/>.
</para>
-<figure id="fig-prefs-misc">
- <title>Miscellaneous preferences</title>
+<figure id="fig-prefs-general">
+ <title>General preferences</title>
<mediaobject>
- <imageobject>
- <imagedata fileref="screenshots/prefs-misc&scs;"/>
- </imageobject>
+ <imageobject>
+ <imagedata fileref="screenshots/prefs-general&scs;"/>
+ </imageobject>
</mediaobject>
</figure>
+
+<!-- ============================================================== -->
<section>
<title>Language</title>
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Threads</title>
</section>
+<!-- ============================================================== -->
<section>
-<title>KDM emails</title>
+<title>Cinema and screen database file</title>
<para>
-DCP-o-matic can send KDMs (see <xref linkend="ch-encryption"/>) to
-cinemas (or anywhere else) via email. To make this work, enter a
-suitable outgoing mail (SMTP) server and ‘from’ address
-for these emails.
+This option allows you to change the file that DCP-o-matic uses to
+store details of the cinemas and screens used to make KDMs.
</para>
</section>
<section>
-<title>Defaults</title>
+<title>Integrated loudness</title>
+
+<para>
+If <guilabel>Find integrated loudness, true peak and loudness range
+when analysing audio</guilabel> is ticked, DCP-o-matic will do extra
+work when analysing audio. Leave this ticked if the extra parameters
+are useful to you. If not, untick it and audio analysis will be
+faster.
+</para>
+
+</section>
+
+<!-- ============================================================== -->
+<section>
+<title>Updates</title>
+
+<para>
+The <guilabel>Check for updates on startup</guilabel> option, if
+enabled, will tell DCP-o-matic to check on <ulink
+url="http://dcpomatic.com/">dcpomatic.com</ulink> to see if there any
+newer versions of DCP-o-matic then the one you are running. If so, a
+dialogue box will open with a link to download the new version.
+available
+</para>
<para>
-The next few options allow you to set up default values for several
-properties of new films that you create.
+The <guilabel>Check for testing updates as well as stable
+ones</guilabel> option will also check for test updates as well as
+those that are formally ‘released’. This is useful if you
+like to live on the bleeding edge!
</para>
+</section>
+
+<!-- ============================================================== -->
+<section>
+<title>Issuer and creator</title>
+<para>
+With these controls you can set the issuer and creator strings that
+will be put into the DCPs which you create.
+</para>
</section>
+
</section>
+<!-- ============================================================== -->
<section>
-<title>Colour conversions</title>
+<title>Defaults</title>
<para>
-The colour conversions tab is shown in <xref linkend="fig-prefs-colour-conversions"/>.
+The defaults tab is shown in <xref linkend="fig-prefs-defaults"/>.
</para>
-<figure id="fig-prefs-colour-conversions">
- <title>Colour conversions preferences</title>
+<figure id="fig-prefs-defaults">
+ <title>Defaults preferences</title>
<mediaobject>
- <imageobject>
- <imagedata fileref="screenshots/prefs-colour-conversions&scs;"/>
- </imageobject>
+ <imageobject>
+ <imagedata fileref="screenshots/prefs-defaults&scs;"/>
+ </imageobject>
</mediaobject>
</figure>
<para>
-As part of the encoding process, DCP-o-matic has to convert the colour
-space of the source files that you use into XYZ, the colour space used
-by the DCI standard.
+The options in this tab simply allow you to set up default values for
+various properties of new films.
+</para>
+
+</section>
+
+<!-- ============================================================== -->
+<section>
+<title>Servers</title>
+
+<para>
+The servers tab is shown in <xref linkend="fig-prefs-servers"/>.
</para>
+<figure id="fig-prefs-servers">
+ <title>Servers preferences</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="screenshots/prefs-servers&scs;"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
<para>
-Colour conversion is discussed in more detail in a separate document
-<ulink url="http://dcpomatic.com/manual/colour.pdf">colour.pdf</ulink>.
+If <guilabel>Use all servers</guilabel> is ticked DCP-o-matic will
+locate encoding servers automatically (see <xref
+linkend="ch-servers"/>).
</para>
<para>
-These preferences control a list of presets which are suitable for
-converting from common input colour spaces to XYZ.
+Instead of this (or in addition) servers can be specified explicitly.
+To add a server, click <guilabel>Add...</guilabel> and enter the host
+name or IP address of the server to use.
</para>
</section>
-<section>
-<title>Metadata</title>
+
+<!-- ============================================================== -->
+<section xml:id="sec-prefs-keys">
+<title>Keys</title>
<para>
-The metadata tab is shown in <xref linkend="fig-prefs-metadata"/>.
+The Keys tab (shown in <xref linkend="fig-prefs-keys"/>) holds options
+related to the keys and certificates used in some parts of DCP
+creation.
</para>
-<figure id="fig-prefs-metadata">
- <title>Metadata preferences</title>
+<figure id="fig-prefs-keys">
+ <title>Keys preferences</title>
<mediaobject>
- <imageobject>
- <imagedata fileref="screenshots/prefs-metadata&scs;"/>
- </imageobject>
+ <imageobject>
+ <imagedata fileref="screenshots/prefs-keys&scs;"/>
+ </imageobject>
</mediaobject>
</figure>
<para>
-This allows you to set up a couple of identifiers that are written
-into the DCP. The default values should cause no problems.
+At the top of the tab is the chain of certificates that will be used
+to sign DCPs and KDMs. DCP-o-matic creates a random chain when you
+first run it and if you are happy to use this chain you can ignore the
+preferences. Otherwise, you can add or remove certificates from the
+chain using the <guilabel>Add...</guilabel> and
+<guilabel>Remove</guilabel> buttons.
+</para>
+
+<para>
+If you want DCP-o-matic to re-create the certificate chain (using new,
+random certificates) click <guilabel>Re-make
+certificates...</guilabel> and specify your organisation and common
+names in the dialogue box that opens.
+</para>
+
+<para>
+Underneath the certificate chain is the private key that corresponds
+to the leaf certificate in the chain. You can specify your own
+private key by clicking <guilabel>Load...</guilabel>. You must do
+this if you change the leaf certificate, so that the leaf private key
+corresponds to the public key held in the leaf certificate.
+</para>
+
+<para>
+Underneath the details of the certificate chain and private key for
+signing of DCPs and KDMs is a second chain and key which is used by
+DCP-o-matic when you import an encrypted DCP as a piece of content.
+The leaf certificate of this chain contains the public key that should
+be used when targeting a KDM at DCP-o-matic.
+</para>
+
+<para>
+If you want to import an encrypted DCP you will need to give the
+decryption certificate to the distributor of the DCP so that they can
+generate a DKDM for you. You can save this certificate to disk by
+clicking <guilabel>Export DCP decryption certificate...</guilabel>.
+As with the signing chain, DCP-o-matic will create a certificate chain
+and private key for you. You can also choose to load your own
+certificates and key or re-make the chain and key with new, random
+values.
+</para>
+
+<para>
+Clicking <guilabel>Export DCP decryption chain...</guilabel> will
+export the whole certificate chain, rather than just the leaf
+certificate.
</para>
</section>
+<!-- ============================================================== -->
<section xml:id="sec-prefs-tms">
<title>TMS</title>
<titleabbrev xml:id="sec-prefs-tms-short">TMS preferences</titleabbrev>
<para>
The TMS tab (shown in <xref linkend="fig-prefs-tms"/>) gives some
options for specifying details about your theatre management system
-(TMS). If you do this, and your TMS accepts SSH connections, you can
-upload DCPs directly from DCP-o-matic to the TMS using the
+(TMS). If you do this, and your TMS accepts SSH or FTP connections,
+you can upload DCPs directly from DCP-o-matic to the TMS using the
<guilabel>Send DCP to TMS</guilabel> option in the
<guilabel>Jobs</guilabel> menu.
</para>
-<figure id="fig-prefs-tms">
- <title>TMS preferences</title>
+<figure id="fig-prefs-tms">
+ <title>TMS preferences</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/prefs-tms&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
+<para>
+<guilabel>Protocol</guilabel> should be set to SCP or FTP as
+appropriate for your TMS. We know that the Arts Alliance Media (AAM)
+and the Doremi ranges uses SCP connections, and that Dolby's TMSs use
+FTP. Do let us know if you use any other type of TMS with the
+<guilabel>Send DCP to TMS</guilabel> feature.
+</para>
+
<para>
<guilabel>TMS IP address</guilabel> should be set to the IP address of
your TMS, <guilabel>TMS target path</guilabel> to the place that DCPs
should be uploaded to (which will be relative to the home directory of
-the SSH user). Finally, the user name and password are the
-credentials required to log into the TMS via SSH.
+the SSH or FTP user). Finally, the user name and password are the
+credentials required to log into the TMS via SSH or FTP.
</para>
+
+<para>
+Note that for this to work on Doremi servers you will need to set the
+<code>PasswordAuthentication</code> option in your server's
+<code>sshd_config</code> to <code>yes</code>.
+</para>
+
</section>
+
+<!-- ============================================================== -->
<section>
<title>KDM email</title>
The KDM email is shown in <xref linkend="fig-prefs-kdm-email"/>.
</para>
-<figure id="fig-prefs-kdm-email">
- <title>KDM email preferences</title>
+<figure id="fig-prefs-kdm-email">
+ <title>KDM email preferences</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/prefs-kdm-email&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
<para>
This is a template for the email that is used to send KDMs out to
-cinemas. You can change it to say whatever you like. The
-‘magic’ string <code>$CPL_NAME</code> will be replaced by
-DCP's title.
+cinemas. You can change it to say whatever you like. A few
+‘magic’ strings will be replaced by information from the
+KDM that is being sent:
+</para>
+
+<table>
+<title>‘Magic’ KDM strings</title>
+<tgroup cols='2' align='left' colsep='1' rowsep='1'>
+<tbody>
+<row>
+<entry><code>$CPL_NAME</code></entry><entry>DCP title</entry>
+</row>
+<row>
+<entry><code>$CINEMA_NAME</code></entry><entry>Cinema name</entry>
+</row>
+<row>
+<entry><code>$SCREENS</code></entry><entry>Name of screen or screens that KDMs are being generated for</entry>
+</row>
+<row>
+<entry><code>$START_TIME</code></entry><entry>The time from which the KDMs are valid</entry>
+</row>
+<row>
+<entry><code>$END_TIME</code></entry><entry>The time until which the KDMs are valid</entry>
+</row>
+</tbody>
+</tgroup>
+</table>
+
+<para>
+The <guilabel>Reset to default text</guilabel> will replace the current KDM email with DCP-o-matic's default.
</para>
</section>
+
+<!-- ============================================================== -->
<section xml:id="sec-prefs-advanced">
<title>Advanced</title>
<titleabbrev xml:id="sec-prefs-advanced-short">Advanced preferences</titleabbrev>
The advanced preferences are shown in <xref linkend="fig-prefs-advanced"/>.
</para>
-<figure id="fig-prefs-advanced">
- <title>Advanced preferences</title>
+<figure id="fig-prefs-advanced">
+ <title>Advanced preferences</title>
<mediaobject>
- <imageobject>
+ <imageobject>
<imagedata fileref="screenshots/prefs-advanced&scs;"/>
- </imageobject>
+ </imageobject>
</mediaobject>
</figure>
this unticked for normal use.
</para>
+<para>
+<guilabel>Only servers encode</guilabel> makes DCP-o-matic encode
+JPEG2000 data only on encoding servers and not on the host. We
+suggest you leave this un-ticked unless you have a good reason to do otherwise.
+</para>
+
+<para>
+With the filename format fields you can adjust the filenames that are
+used for metadata (CPL and PKL files) and assets (MXF and subtitle
+files). Below each field there is a list of the ‘magic’
+values that you can use in the format and an example of a filename
+that you might see with your current settings.
+</para>
+
<para>
The four checkboxes labelled <guilabel>Log</guilabel> control what
sort of messages DCP-o-matic writes to its log file when creating a
unticked.
</para>
-</section>
</section>
</chapter>
however, always possible.
</para>
+
+<!-- ============================================================== -->
<section>
<title>DCP frame rate limitations</title>
even refuse to ingest.
</para>
+
+<!-- ============================================================== -->
<section>
<title>Guaranteed rates</title>
<para>
The only rates that are (pretty much) guaranteed to work on all DCI
-projectors is 24 frames per second (fps) for video and 48kHz or 96kHz
+projectors are 24 frames per second (fps) for video and 48kHz or 96kHz
for audio. If you are sending your DCPs to unknown places it wise to
consider using these rates if at all possible.
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Other often-supported rates</title>
<para>
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Adapting content to fit the DCP rate</title>
</section>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Setting up</title>
The <guilabel>Frame Rate</guilabel> control in the
<guilabel>DCP</guilabel> tab sets the video frame rate that the DCP
will use. Clicking <guilabel>Use best</guilabel> sets the rate to
-what DVD-o-matic thinks is the best for your content. With this
+what DCP-o-matic thinks is the best for your content. With this
button, DCP-o-matic assumes that the whole range of frame rates (24,
25, 30 and 48fps) are allowable.
</para>
can mix Windows PCs, Macs and Linux machines as you wish.
</para>
+
+<!-- ============================================================== -->
<section>
<title>Running the servers</title>
</para>
<programlisting>
-dcpomatic_server_cli
+dcpomatic2_server_cli
</programlisting>
<para>
</para>
<programlisting>
-dcpomatic_server_cli -t 4
+dcpomatic2_server_cli -t 4
</programlisting>
<para>
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Setting up DCP-o-matic</title>
</para>
</section>
+
+<!-- ============================================================== -->
<section>
<title>Some notes about encode servers</title>
after you have created a DCP for a film called ‘DCP Test’.
</para>
-<figure id="fig-file-structure">
- <title>Creating a new film</title>
+<figure id="fig-file-structure">
+ <title>Creating a new film</title>
<mediaobject>
- <imageobject>
- <imagedata fileref="diagrams/file-structure&dia;"/>
- </imageobject>
+ <imageobject>
+ <imagedata scale="100" fileref="diagrams/file-structure&dia;"/>
+ </imageobject>
</mediaobject>
</figure>
Following this is the DCP itself:
<code>DCP-TEST_EN-XX_UK-U_51_2K_CSY_20130218_CSY_OV</code>. This
contains some small XML files, which describe the DCP, and two large
-MXF files, which contain the DCP's audio and video data. This folder
+MXF files, which contain the DCP's audio and video data. It may also
+contain subtitles in either XML or MXF format. This folder
(<code>DCP-TEST_EN-XX_...</code>) is what you should ingest, or pass
to the cinema which is showing your DCP.
</para>
This chapter collects a few notes on bits of DCP-o-matic that do not fit elsewhere in the manual.
</para>
+
+<!-- ============================================================== -->
<section>
<title>Resuming encodes</title>
</chapter>
+<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
+<title>Common tasks</title>
+
+<para>
+This chapter describes how to carry out some commonly-required tasks
+with DCP-o-matic. The full details are elsewhere in the manual: here
+we just discuss different approaches to these tasks and how to carry
+them out.
+</para>
+
+<section>
+<title>Adding subtitles to an existing DCP</title>
+
+<para>
+You have three options:
+</para>
+
+<itemizedlist>
+<listitem>Make a “Version File” (VF) DCP.</listitem>
+<listitem>Make a complete DCP with projector-added subtitles.</listitem>
+<listitem>Make a complete DCP with burnt-in subtitles.</listitem>
+</itemizedlist>
+
+<para>
+Making a VF DCP is usually the best option. This will be a very small
+DCP which contains only the subtitles: it refers to your existing DCP
+for the picture and sound. The projectionist will ingest both the
+existing and VF DCPs and play back the VF. The advantages of this
+approach are that the VF is very quick to generate, and small in size,
+making it easy to distribute. This is especially useful if you have
+to make VF DCPs in many different languages.
+</para>
+
+<para>
+Making a complete DCP with projector-added subtitles gives you a new,
+single DCP which the projectionist can ingest and play. It will be
+the same size as your existing DCP, and fairly quick to create. This
+approach relies on the projector (or server) to create the subtitles
+and overlay them on the image, which mostly works well but is not
+100% reliable.
+</para>
+
+<para>
+Making a complete DCP with burnt-in subtitles gives you a new, single DCP
+but with the subtitles rendered by DCP-o-matic and copied into your
+image. This is slower to create than a DCP with projector-added
+subtitles as every video frame with a subtitle must be re-encoded.
+The advantage of this approach is that it is less likely to go wrong,
+especially if you are using unusual subtitle positioning or character
+sets.
+</para>
+
+</section>
+
+<section>
+<title>Making a VF DCP</title>
+
+<itemizedlist>
+<listitem>Start a new DCP-o-matic film.</listitem>
+<listitem>Click <guilabel>Add folder...</guilabel> and specify your existing DCP's folder.</listitem>
+<listitem>Go to the <guilabel>DCP</guilabel> tab and choose <guilabel>Split by video content</guilabel> for <guilabel>Reel type</guilabel>.</listitem>
+<listitem>Go to the <guilabel>Video</guilabel> and
+<guilabel>Audio</guilabel> tabs in turn and tick the <guilabel>Refer to existing DCP</guilabel> checkboxes.</listitem>
+<listitem>Add your subtitles to the film in whatever format you have.</listitem>
+<listitem>Check the subtitle appearance in the preview; it will be
+slow to respond as it is having to decompress images from the existing
+DCP.</listitem>
+<listitem>Choose <guilabel>Make DCP</guilabel> from the menu.</listitem>
+</itemizedlist>
+
+</section>
+
+<section>
+<title>Making a complete DCP with projector-added subtitles</title>
+
+<itemizedlist>
+<listitem>Start a new DCP-o-matic film.</listitem>
+<listitem>Click <guilabel>Add folder...</guilabel> and specify your existing DCP's folder.</listitem>
+<listitem>Add your subtitles to the film in whatever format you have.</listitem>
+<listitem>Check the subtitle appearance in the preview; it will be
+slow to respond as it is having to decompress images from the existing
+DCP. Adjust the appearance using controls in the
+<guilabel>Subtitle</guilabel> tab if required.</listitem>
+<listitem>Choose <guilabel>Make DCP</guilabel> from the menu.</listitem>
+</itemizedlist>
+
+</section>
+
+<section>
+<title>Making a complete DCP with burnt-in subtitles</title>
+
+<itemizedlist>
+<listitem>Start a new DCP-o-matic film.</listitem>
+<listitem>Click <guilabel>Add folder...</guilabel> and specify your existing DCP's folder.</listitem>
+<listitem>Add your subtitles to the film in whatever format you have.</listitem>
+<listitem>Go to the <guilabel>Subtitle</guilabel> tab and tick the <guilabel>Burn subtitles into image</guilabel> checkbox.</listitem>
+<listitem>Check the subtitle appearance in the preview; it will be
+slow to respond as it is having to decompress images from the existing
+DCP. Adjust the appearance using controls in the
+<guilabel>Subtitle</guilabel> tab if required.</listitem>
+<listitem>Choose <guilabel>Make DCP</guilabel> from the menu.</listitem>
+</itemizedlist>
+
+</section>
+
+</chapter>
+
</book>